Abstract:Purpose: Computational models of microwave ablation (MWA) are widely used during the design optimization of novel devices and are under consideration for patient-specific treatment planning. The objective of this study was to assess the sensitivity of computational models of MWA to tissue biophysical properties. Methods: The Morris method was employed to assess the global sensitivity of the coupled electromagnetic-thermal model, which was implemented with the finite element method (FEM). The FEM model incorporated temperature dependencies of tissue physical properties. The variability of the model was studied using six different outputs to characterize the size and shape of the ablation zone, as well as impedance matching of the ablation antenna. Furthermore, the sensitivity results were statistically analyzed and absolute influence of each input parameter was quantified. A framework for systematically incorporating model uncertainties for treatment planning was suggested. Results: A total of 1221 simulations, incorporating 111 randomly sampled starting points, were performed. Tissue dielectric parameters, specifically relative permittivity, effective conductivity, and the threshold temperature at which they transitioned to lower values (i.e., signifying desiccation), were identified as the most influential parameters for the shape of the ablation zone and antenna impedance matching. Of the thermal parameters considered in this study, the nominal blood perfusion rate and the temperature interval across which the tissue changes phase were identified as the most influential. The latent heat of tissue water vaporization and the volumetric heat capacity of the vaporized tissue were recognized as the least influential parameters. Based on the evaluation of absolute changes, the most important parameter (perfusion) had approximately 40.23 times greater influence on ablation area than the least important parameter (volumetric heat capacity of vaporized tissue). Another significant input parameter (permittivity) had 22.26 times higher influence on the deviation of ablation edge shape from a sphere than one of the less important parameters (latent heat of liver tissue vaporization). Conclusions: Dielectric parameters, blood perfusion rate, and the temperature interval across which the tissue changes phase were found to have the most significant impact on MWA model outputs. The latent heat of tissue water vaporization and the volumetric heat capacity of the vaporized tissue were recognized as the least influential parameters. Uncertainties in model outputs identified in this study can be incorporated to provide probabilistic maps of expected ablation outcome for patient-specific treatment planning.

Research on Evaluation Optical Parameters of Bone Thermal Injury During Microwave Ablation

Microwave Ablation Efficacy Evaluation of Bone Tissue Based on Near Infrared Spectrum

Expanded modeling of temperature-dependent dielectric properties for microwave thermal ablation

Application study of using ultrasonic integral backscatter to monitor microwave coagulation therapy

Study on the relationship between reduced scattering coefficient and Young’s modulus of tumors in microwave ablation

Recent research advances on simulation modeling of temperature distribution in microwave ablation of lung tumors

Numerical models to evaluate the temperature increase induced by ex vivo microwave thermal ablation

Study on microwave ablation temperature prediction model based on grayscale ultrasound texture and machine learning

Numerical study of the induction of intratumoral apoptosis under microwave ablation by changing slot length of microwave coaxial antenna

Sensitivity of microwave ablation models to tissue biophysical properties: A first step toward probabilistic modeling and treatment planning

Experimental assessment of microwave ablation computational modeling with MR thermometry

Thermal field study of ceramic slot microwave ablation antenna based on specific absorption rate distribution function

A prediction model for guiding tumor microwave ablation surgery based on simulation

A Distribution-Based Method for Thermal Damage Model Analysis and Optimization in Brain Laser Interstitial Thermal Therapy

Optimal condition confirmation of treatment conditions through analysis of intratumoral apoptotic temperature range of microwave ablation for various microwave frequencies and antenna insertion depth

Thermal infrared images to quantify thermal ablation effects of acid and base on target tissues

Directional microwave ablation in spine: experimental assessment of computational modeling

Thermal damage and the prognostic evaluation of laser ablation of bone tissue-a review

Temperature control and intermittent time-set protocol optimization for minimizing tissue carbonization in microwave ablation

Electromagnetic-thermal Analysis of the Effect of Microwave Ablation of Thyroid Nodules

Spectral imaging of thermal damage induced during microwave ablation in the liver