Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Invetigation of Temperature Sensitivity of a Geomteric Anti-Spring based MEMS Gravimeter

The Analysis of Temperature Effect and Temperature Compensation of Moems Accelerometer Based on A Grating Interferometric Cavity

Thermal stress of MOEMS Accelerometers Based on Grating Interferometric cavity

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Temperature Compensation Method for MEMS Accelerometer Based on Resonant Frequency

Analysis and Amelioration about the Cross-Sensitivity of A High Resolution Moems Accelerometer Based on Diffraction Grating

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Three robust temperature-drift compensation strategies for a MEMS gravimeter

An Optical Interferometry Based MEMS Accelerometer Applicable to Seismic-Grade Measurement

A Highly Stable and Sensitive MEMS-Based Gravimeter for Long-Term Earth Tides Observations

A vibrating beam MEMS accelerometer for gravity and seismic measurements

A Nineteen Day Earth Tide Measurement with a MEMS Gravimeter

A Tunable Quasi-Zero Stiffness Mechanism For Thermal Compensation Of A Mems Gravimeter

Temperature Compensation of the MEMS-Based Electrochemical Seismic Sensors

Thermoelastic Damping in MEMS Gyroscopes at High Frequencies

Thermal properties analysis of MEMS sensors by micro-grid method

Fabrication and Characterization of a MEMS Thermal Convective Accelerometer on Silicon-in-Glass Substrate

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control

MEMS surface microgravimetry for geotechnical surveying

In-Situ Compensation on Temperature Coefficient of the Scale Factor for a Single-Axis Nano-g Force-Balance MEMS Accelerometer