Abstract:To realize cost-effectively manufacture of high-performance Si3N4 porous ceramic, a ferrosilicon nitride porous ceramic with an optimized interlocking structure was synthesized by flash combustion synthesis using FeSi75 powder as raw material. And the technology has been improved in many ways to ensure stable industrial production. The theoretical combustion temperature of FeSi75 in N2(g) is up to 4608K, while Si3N4 is unstable. Both adding diluent and designing the preheat temperature of nitrogen are taken to control synthesis temperature below 1600 °C. During synthesis, the Fe–Si liquid phase and SiO(g), which are essential for the selective growth of elongated columnar β-Si3N4 and whisker α-Si3N4 respectively, are formed firstly. Then, nitriding proceed in multiple ways. N diffuses through Fe–Si(l) and reacts with Si to form β-Si3N4, and the growth of elongated β-Si3N4 in Fe–Si liquid follows the dynamic ripening model, which is very fast and effective. Thus, an interlocking structure composed of elongated β-Si3N4 with an aspect ratio above 20 is reached. There is also an indirect nitridation reaction, that is, FeSi75 preferentially reacts with trace O2 in atmosphere to form SiO(g), which is further nitrided to form needle-like α-Si3N4. Needle-like α-Si3N4 is interspersed in the well-developed columnar β-Si3N4, making the structure stronger. Fe finally exists in the form of Fe3Si, which binds the surrounding elongated Si3N4 to form a sea-urchin like unit, making the structure more stable and strengthened. Through control of these reactions, optimizations in microstructure are reached, and the annual output of has reached 25,000 tons. The reaction model is established.

Combustion synthesis of porous β-SiAlON from aluminum ferrosilicon and aluminosilicate hollow microspheres

Progress of porous Al-containing intermetallics fabricated by combustion synthesis reactions: a review

Combustion synthesis of high flexural strength, low linear shrinkage and machinable porous β-Si3N4 ceramics

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Porous Si/Al-Si spherical powders with controllable structure and superior reactivity via dealloying of Al-Si

Fabrication of one-dimensional rod-like α-SiAlON powders in large scales by combustion synthesis

Mechanical-activation-assisted combustion synthesis of α-SiAlON in air

Solid-state NMR and XRD study of α-SiAlON powders prepared by combustion synthesis

Facile and Economical Preparation of SiAlON-Based Composites Using Coal Gangue: from Fundamental to Industrial Application

Synthesis of Oxynitride Composites during Combustion of a Ferrosilicon–Natural Mineral–Aluminum Mixture in Nitrogen

Preparation of Self-Coating Al2O3 Bonded SiAlON Porous Ceramics Using Aluminum Dross and Silicon Solid Waste under Ambient Air Atmosphere

Combustion Synthesis of α-SiAlON Powders with Low Oxygen Contents by Using Fluorides as Reactants

Combustion Synthesis of β-Si<sub>3</sub>N<sub>4</sub> and β-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO<sub>3</sub> and NH<sub>4</sub>F

Phase transformation and growth of rod-like α-SiAlON particles during combustion synthesis

Fabrication of yttrium-stabilized α -SiAlON powders with rod-like crystals by combustion synthesis

Controllable Synthesis of High-purity β-SiAlON Powder

Mesoporous alumina obtained by combustion synthesis without template

Formation of β-SiAlON micropalings consisting of nanorods during combustion synthesis

Preparation of Y-SiAlON rod-like crystals and whiskers by combustion synthesis

Combustion synthesis of alpha SiAlON powders with low oxygen contents by using fluorides as reactants

Cost-effective manufacture and synthesis mechanism of ferrosilicon nitride porous ceramic with interlocking structure