Abstract:In order to further promote the commercial application of perovskite solar cells (PSCs), it is particularly important to fabricate devices in the ambient air condition. Herein, we explore a simple method to reproduce high-efficiency and stable PSCs using the one-step anti-solvent deposition conducted in the full ambient air. NH4Ac (ammonium acetate), which is green and environmentally friendly, is first introduced into an anti-solvent (ethyl acetate) to enhance the photovoltaic performance and stability of devices. NH4+ causes the intermediate phase to undergo a process of cation exchange, thereby delaying crystallization. Ac– makes the additive and A-site cation form hydrogen bonds, which in turn makes the intermediate phase more stable. The dual effects of NH4+ and Ac– delay the crystallization of the perovskite film, reduce the density of defect states, and decrease the non-radiative recombination of carriers. By optimizing the concentration of NH4Ac, a champion power conversion efficiency (PCE) of 20.41% and an average PCE of 19.46 ± 0.64% are achieved, which is currently one of the highest efficiencies in fabricating PSCs under the full ambient air condition. Furthermore, the corresponding PSCs without encapsulation can maintain 82% of its initial PCE when stored in full ambient air condition (30–40% RH) for 30 days.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c04542.SEM images with different magnifications of perovskite films of w/o-NH4Ac (a, b), 0.005-NH4Ac (c, d), 0.01-NH4Ac (e, f), and 0.1-NH4Ac (g, h); Jsc dependence at various illumination intensities of PSCs; cross-sectional SEM image of the FTO/M-TiO2/C-TiO2/perovskite/Spiro-MeOTAD/Ag device; and normalized PCE of devices (stored in ambient air 60–70% RH) aging at 85 °C over time (PDF)This article has not yet been cited by other publications.

Efficient micrometer-scale thick-film perovskite solar cells with superior stability

High‐Performance Thickness Insensitive Perovskite Solar Cells with Enhanced Moisture Stability

Gas-solid Reaction Based over One-Micrometer Thick Stable Perovskite Films for Efficient Solar Cells and Modules

Bulk Defect Suppression of Micrometer-Thick Perovskite Single Crystals Enables Stable Photovoltaics

Enhanced Efficiency and Stability of Perovskite Solar Cells by 2D Perovskite Vapor-Assisted Interface Optimization

Zwitterion-Stabilizing Scalable Bladed -Phase Cs<sub>0.1</sub>FA<sub>0.9</sub>PbI<sub>3</sub> Films for Efficient Inverted Planar Perovskite Solar Cells

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Approximately 800-Nm-thick Pinhole-Free Perovskite Films Via Facile Solvent Retarding Process for Efficient Planar Solar Cells

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

HIGHLY STABLE PEROVSKITE FILM WITH IONIC LIQUID ADDITIVES FOR AMBIENT AIR DEPOSITION

Controllable Cosolvent Blade-Coating Strategy Toward Low-Temperature Fabrication of Perovskite Solar Cells

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

Ultrarapid crystallization of low-dimensional perovskite with excellent stability for future high-throughput fabrication

Highly Efficient (110) Orientated FA‐MA Mixed Cation Perovskite Solar Cells Via Functionalized Carbon Nanotube and Methylammonium Chloride Additive

Efficient and stable perovskite solar cells fabrication in open air through adopting a dye interlayer

Improving Efficiency and Stability of Perovskite Solar Cells Enabled by A Near-Infrared-Absorbing Moisture Barrier

Green-solvent-processed Formamidinium-Based Perovskite Solar Cells with Uniform Grain Growth and Strengthened Interfacial Contact Via a Nanostructured Tin Oxide Layer

Enhancing the Stability of Perovskite Solar Cells with a Multilayer Thin-Film Barrier

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

Simple Method of Dual Passivation with Efficiency Beyond 20% for Fabricating Perovskite Solar Cells in the Full Ambient Air

Superior Textured Film and Process Tolerance Enabled by Intermediate-State Engineering for High-Efficiency Perovskite Solar Cells