Abstract:Efficiency losses in hybrid chemical vapor deposition (HCVD)‐based perovskite solar cells are systematically investigated to better understand the oxygen loss of electron transport layer, solid–gas reaction, and nucleation/growth of perovskites. The resultant solar cells yield a champion power conversion efficiency of 21.98% and 16.16% for small area solar cells and mini‐modules, respectively. The unencapsulated small‐area solar cell shows outstanding operational stability exceeding 4000 h. Hybrid chemical vapor deposition (HCVD) is a promising method for the up‐scalable fabrication of perovskite solar cells/modules (PSCs/PSMs). However, the efficiency of the HCVD‐based perovskite solar cells still lags behind the solution‐processed PSCs/PSMs. In this work, the oxygen loss of the electron transport layer of SnO2 in the HCVD process and its negative impact on solar cell device performance are revealed. As the counter‐measure, potassium sulfamate (H2KNO3S) is introduced as the passivation layer to both mitigate the oxygen loss issue of SnO2 and passivate the uncoordinated Pb2+ in the perovskite film. In parallel, N‐methylpyrrolidone (NMP) is used as the solvent to dissolve PbI2 by forming the intermediate phase of PbI2•NMP, which can greatly lower the energy barrier for perovskite nucleation in the HCVD process. The perovskite seed is employed to further modulate the kinetics of perovskite crystal growth and improve the grain size. The resultant solar cells yield a champion power conversion efficiency (PCE) of 21.98% (0.09 cm2) with a stable output performance of 21.15%, and the PCEs of the mini‐modules are 16.16% (22.4 cm2, stable output performance of 14.72%) and 12.12% (91.8 cm2). Furthermore, the unencapsulated small area device shows an outstanding operational stability with a T80 lifetime exceeding 4000 h.

Gas-solid Reaction Based over One-Micrometer Thick Stable Perovskite Films for Efficient Solar Cells and Modules

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

Scalable Fabrication of >90 Cm2 Perovskite Solar Modules with >1000 H Operational Stability Based on the Intermediate Phase Strategy

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

Efficient micrometer-scale thick-film perovskite solar cells with superior stability

Retarding solid-state reactions enable efficient and stable all-inorganic perovskite solar cells and modules

Scalable Fabrication Of Stable High Efficiency Perovskite Solar Cells And Modules Utilizing Room Temperature Sputtered Sno2 Electron Transport Layer

Ionic Liquid Stabilized Perovskite Solar Modules with Power Conversion Efficiency Exceeding 20%

Efficient and Stable Perovskite Solar Modules Enabled by Inhibited Escape of Volatile Species

Holistic Strategies Lead to Enhanced Efficiency and Stability of Hybrid Chemical Vapor Deposition Based Perovskite Solar Cells and Modules

High‐Performance Thickness Insensitive Perovskite Solar Cells with Enhanced Moisture Stability

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Hybrid chemical vapor deposition enables scalable and stable Cs-FA mixed cation perovskite solar modules with a designated area of 91.8 cm2 approaching 10% efficiency

Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells

Air-processed and Mixed-Cation Single Crystal Engineering-Based Perovskite Films for Efficient and Air-Stable Perovskite Solar Cells

Room-Temperature Sputtered SnO2 as Robust Electron Transport Layer for Air-Stable and Efficient Perovskite Solar Cells on Rigid and Flexible Substrates

Efficient and Stable Perovskite Solar Cells and Modules Enabled by Tailoring Additive Distribution According to the Film Growth Dynamics

Fast and Controllable Electric-Field-Assisted Reactive Deposited Stable and Annealing-Free Perovskite toward Applicable High-Performance Solar Cells

Up-Scalable Fabrication of SnO2 with Multifunctional Interface for High Performance Perovskite Solar Modules

Perovskitoid‐Templated Formation of a 1D@3D Perovskite Structure toward Highly Efficient and Stable Perovskite Solar Cells