Abstract:In this paper, we proposed a roadmap of the need for silver reduction in industrial silicon solar cells in the TW era. Several metallization approaches towards an intermediate and long‐term target level of 5 mg/W and 2 mg/W have been systematically discussed. Secondly, we presented a promising hybrid metallization design by combining the advantages of screen‐printing and plating technologies to significantly reduce silver consumption thereby achieving the target value of 5 mg/W for TOPCon and 2 mg/W for PERC solar cells. As PV manufacturing heads towards the multi‐TW scale, it is required to carefully evaluate a wide range of concepts including not only efficiency and cost but also material consumption to ensure sustainable manufacturing of PV technologies. The rapid growth of PV could significantly increase the demand for several materials required in solar cells such as silver, aluminium, copper and even silicon, thereby causing dramatic price fluctuations. Furthermore, the PV manufacturing capacity would be at risk of being limited by the supply of some scarce metals, e.g. with current industrial implementations – screen printing (SP) metallization, the capacities of PERC and TOPCon could be capped at 377 GW and 227 GW with 20% of global silver supply available to the PV industry. In addition, PV systems have ~25–30 years lifespan to ensure low LCOE and emissions. Recycling alone will not provide an immediate solution to overcome the limitation of material consumption in the exponentially growing PV market. It is expected that the Ag usage needs to be reduced to no more than 5 mg/W or even 2 mg/W for all solar cell technologies to allow a multi‐TW manufacturing scale without depleting the global silver supply. Therefore, further advancements in metallization technologies are critically and urgently required to significantly reduce the silver consumption of current screen‐printed contacts in industrial silicon solar cells. This paper firstly presents a roadmap towards the 5 mg/W and 2 mg/W silver consumption targets with various metallization technologies and screen‐printing designs. Subsequently, a hybrid plating on screen‐printed metallization design was proposed to improve the performance and reduce the silver consumption of screen‐printed contacts. The experimental results have demonstrated up to 1.08%abs improvements in fill factor and 0.3%abs gains in cell efficiency. In addition, up to 40%rel reductions in finger silver consumption have been achieved without any sacrifices in the electrical conductivity of such hybrid screen‐printed and plated fingers. This work proposes not only a roadmap but also a promising approach to significantly reduce the Ag demand and benefit sustainable production of industrial screen‐printed silicon solar cells in the TW era.

Review on Metallization Approaches for High-Efficiency Silicon Heterojunction Solar Cells

Review on Metallization Approaches for High-Efficiency Silicon Heterojunction Solar Cells

Copper metallization of electrodes for silicon heterojunction solar cells: Process, reliability and challenges

Metallization optimization for high efficiency silicon heterojunction solar cells using low-temperature paste screen printing

Printing technologies for silicon solar cell metallization: A comprehensive review

Review of the Potential of the Ni/Cu Plating Technique for Crystalline Silicon Solar Cells

Process challenges of high-performance silicon heterojunction solar cells with copper electrodes

Towards a cutting‐edge metallization process for silicon heterojunction solar cells with very low silver laydown

The Development of Carbon/Silicon Heterojunction Solar Cells through Interface Passivation

Evaluation of different approaches for HJT cells metallization based on low temperature copper paste

High‐Throughput Indirect Gravure Printing Applied to Low‐Temperature Metallization of Silicon‐Based High‐Efficiency Solar Cells

Analysis of different printing technologies for metallization of crystalline silicon solar cells

Progress in screen-printed metallization of industrial solar cells with SiOx/poly-Si passivating contacts

A Technological Review of the Highly Efficient Heterojunction with Intrinsic Thin-layer (HIT)Solar Cells

Printable Solar Cells from Advanced Solution-Processible Materials

Review: Heterojunction Tandem Solar Cells on Si-Based Metal Oxides

Passivating contacts for high-efficiency silicon-based solar cells: From single-junction to tandem architecture

Recent advancements in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells: Technology review and perspectives

Advancements in Passivation and Metallization Techniques for n-Type Monocrystalline Silicon Solar Cells

Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing

Advanced metallization with low silver consumption for silicon heterojunction solar cells