Abstract:The heat partition coefficient between two finite thickness contact discs during long-time sliding is studied with a coupled finite element method. Results show that the heat partition coefficient varies from its initial value to another steady state value rapidly instead of being a constant all the time. An analytical solution of the temperature field under invariant heat flux input is deduced, which tells that there exists a unique critical thickness ratio between the contact discs that keeps the heat partition coefficient a constant. An equivalent method for single-material contact bodies is proposed that is capable of calculating the steady state heat partition coefficient for any thickness ratio. It reveals that the steady state heat partition coefficient only has relationship with the mass density and the heat capacity of the materials and the thickness ratio. Based on this method, a two-step material equivalent method is further proposed for the contact discs that have friction linings on them. The solution shows that the steady state heat partition coefficient in this situation is also only determined by the material properties and the layer thicknesses. A test bench of multi-disc clutch is set up and a series of sliding experiments are conducted to validate the proposed equivalent methods and solutions of steady state heat partition coefficient. The measured experimental temperature variations show that the temperature level of the separator disc in the clutch is overestimated with the constant heat partition coefficient of semi-infinite model, while it is close to those calculated results with steady state heat partition coefficient. Therefore, the temperature fields of the contact discs during long-time sliding with constant speed can be figured out efficiently using the steady state heat partition coefficient with only small error, and these equivalent methods benefit the multi-disc clutch design and temperature estimation in practical applications.

The Simulation Analysis of Thermo-Mechanical Coupled Stress for Wet Clutch Friction Plate Based on ABAQUS

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Numerical Simulation of the Stress, Temperature & Wear Behaviors of the Drum Brake

Notice of Removal: Numerical Simulation of the Stress, Temperature & Wear Behaviors of the Drum Brake

An Analysis on the Thermoelastic Instability of Wet Multi-disc Clutch

Simulation and experiment for warp characteristic of wet multiple disc clutches

Life Cycle Prediction and Evaluation of Clutch Friction Plate Considering Wear Models and Thermal Stress

Simulation Analysis of the Temperature Field and Stress Field of the Brake Shoe of the Heavy-Load Wagon

Sliding State Analysis of Fractal Rough Interface Based on the Finite Element Method

Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

Tribo-thermal simulation study of AMT dry clutch assembly under the continuous sliding grinding condition

A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact

Analytical Model and Material Equivalent Methods for Steady State Heat Partition Coefficient Between Two Contact Discs in Multi-Disc Clutch

Thermoelastic coupling vibration and stability analysis of rotating circular plate in friction clutch

Simulation of the Friction Temperature Field for Disc Brake

FINITE ELEMENT ANALYSIS OF THE THERMAL BEHAVIOUR OF SINGLE-DISC CLUTCHES DURING REPEATED ENGAGEMENTS

Thermomechanical Coupling Simulation and Analysis of Wet Multi-Disc Brakes During Emergency Braking

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

A temperature field model based on energy flow analysis of wet clutch sliding interface