Abstract:We have demonstrated an anisotropic bulk SmFe12-based sintered magnet with sufficiently large coercivity of μ0Hc=1.0 T and a remanence ratio (Mr/Ms) of 0.84 using conventional liquid sintering process of nitrogen jet-milled powders with the nominal composition of Sm8Fe73.5Ti8V8Ga0.5Al2 (at.%). The moderate saturation magnetization of μ0Ms =0.74 T is due to the dissolution of a large amount of stabilizing elements, Ti, V, and Al, in the 1:12 phase. The anisotropy field of the main 1:12 phase was determined to be µ0HA=10.2 T. Detailed multi-scale microstructure characterizations by scanning electron microscope (SEM) and scanning transmission electron microscope (STEM) showed the magnet consists of Sm(Fe,Ti,V,Al)12 grains with the ThMn12-type crystal structure with a size distribution of ∼3−15µm that are enveloped by ∼3 nm thick Sm-rich amorphous intergranular phase. Secondary phases including metallic (Sm,Ga)-rich, SmOx, and Fe2(Ti,V) phases coexist with the 1:12 phase. Measured angular dependence of coercivity follows Kondorsky type magnetization reversal, suggesting the coercivity arises due to the pining of magnetic domain walls. Magneto-optical Kerr effect (MOKE) microscopy revealed magnetization reversal starts at the grain boundaries and interphase interfaces and thin amorphous intergranular phases act as the pinning sites against magnetic domain wall propagation. Small micromagnetic parameter α∼0.164 estimated by fitting to the Kronmüllar equation suggest that the reduction of the grain size and engineering of the intergranular phase to an Fe-lean composition are necessary to improve the coercivity toward µ0HA/3=3.4 T. This work provides guidelines on an optimum microstructure to develop an anisotropic bulk SmFe12-based sintered magnet with a sufficiently large coercivity.

Advanced Magnetic Actuation: Harnessing the Dynamics of Sm 2 Fe 17- x Cu x N 3 Composites

Coercivity mechanism of high-performance anisotropic heterostructure SmCo 5 magnets

Overview of composition and technique process study on 2:17-type Sm–Co high-temperature permanent magnet

Magnetic Properties and Microstructures of Multi-Component Sm–Co-based Films Prepared by High-Throughput Experiments

Chemical Synthesis of Next Generation High Energy Product Hybrid SmCo Permanent Magnets for High Temperature Applications

Magnetic Properties Enhancement of Multi-Element-doped SmCo7 Nanocrystalline Alloys

Hard and soft magnetic materials for electromagnetic microactuators

Aluminum/SmCo5 composites for structural and magnetic applications

Overcoming mechanical fragility in Sm-Co permanent magnet materials

Structural Evolution of Anisotropic SmCo6.8Hf0.2 Nanocrystalline Magnet Prepared by Hot Deformation

In Situ High-Temperature Transmission Electron Microscopy Investigation of Dynamic Element Migration for Sm-Co-Fe-Cu-Zr Sintered Magnets

Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo$_{5}$ Permanent Magnets Generated by High Pressure Torsion

Study of the Anisotropic Sm2Fe17N3 Powders with High Performance

High-coercivity SmFe 12 -based anisotropic sintered magnets by Cu addition

An in-situ formed TiC/FeCoNi medium-entropy composite with excellent combination of mechanical and soft magnetic properties

Tuning the morphology of soft magnetic phase to optimize the microstructure of SmCo5/α-Fe nanocomposites

Composition and Microstructural Control of Sm2Fe17N3 Powders: a Promising Candidate for Next-Generation Permanent Magnets

Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnet

Research Progress of SmCo5 Nanoparticles and Nanocomposites

High remanence Fe‐rich 2:17‐type Sm‐Co sintered magnets mediated via multi‐scale microstructure

Optimizing the High-Frequency Magnetic Properties of Soft Magnetic Composites Via Surface Nanoengineering