Abstract:Existing vibration displacement control strategies in active magnetic bearing (AMB) flexible rotor systems suffer from a trade-off between damping and noise, which makes it difficult for the system to pass the critical speeds of bending modes. To solve this problem, a rotor vibration velocity and acceleration feedback control strategy based on a non-contact velocity sensor technique is proposed in this paper. The non-contact rotor vibration velocity sensor uses the induced electromotive force caused by changes in the air gap reluctance to measure the rotor vibration velocity. First, an analytical model of the sensor was developed and validated by the finite element method. Then, the structure of the vibration velocity and acceleration feedback control was proposed. Analytical and numerical calculations demonstrated that the rotor vibration velocity feedback is more effective for low-frequency vibrations, whereas the acceleration feedback is utilized to deal with resonances of higher-order bending modes and the weak controllability of the rotor system. To avoid excessive control gains at high frequencies, the least mean square algorithm was adopted to extract the synchronous components of the acceleration. Finally, the experiments were carried out in the AMBs flexible rotor test setup. The results showed that the vibration velocity sensor can be used to assist the proportional–integral–derivative controller to obtain extra damping without significantly increasing the current noise. Low-frequency vibrations were significantly reduced by damping from the rotor vibration velocity feedback. The vibrations at the critical speed of the 2nd bending mode were substantially suppressed by the rotor vibration acceleration feedback.

Active vibration control for rotating machines with current-controlled electrodynamic actuators and velocity feedback of the machine feet based on a generalized mathematical formulation

Active Vibration Control Analysis of Spatial Structures by State-Derivative Feedback Algorithm

Active Vibration Control of Flexible Structures with Super-Coiled Actuators

Random Vibration Control for Multi-Degree-of-freedom Mechanical Systems with Soft Actuators

H<sub>∞</sub>/μ Robust Control of Vibration for an Ultra-Precision Grinding Machine

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Active Control for Unbalanced Vibration Control of Electric Spindle-Tool System

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

Vibration Control of a Radial Journal Eddy Current Damper on Flexible Rotor Systems

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Active Vibration Control for A Rotor System Subjected to Random Excitation

Active Vibration Control of a Non-collocated AMBs Flexible Rotor System to Pass the First Bending Critical Speed

A Built-in Force Actuator for Active Unbalanced Vibration Control of Grinding Wheel

Vibration Control of Base-Excited Rotors Supported by Active Magnetic Bearing Using a Model-Based Compensation Method

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Active Fast Vibration Control of Rotating Machinery Via a Novel Electromagnetic Actuator

Torsional active-passive dampers on rotational machinery

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Dynamic analysis and vibration control of a rotor-Active magnetic bearings system with base motion