Abstract:A rotor system supported by active magnetic bearings (AMBs) is actually a second-order dynamical system, whose dynamical characteristics should be considered in the design process of the controller. The relationships between the dynamical parameters and the control parameters can be established by the eigenstructure assignment. Output feedback dynamical compensators (OFDCs) are proposed based on the eigenstructure assignment for an AMBs-rigid rotor system in this article. First, the model of the four-degree-of-freedom AMBs-rigid rotor system was established, and it was decoupled into two single-degree-of-freedom (S-DOF) translational sub-systems and two S-DOF rotational sub- systems through the modal decoupling method. Aiming to the control of the four S-DOF systems, the relationships among the parameters of the OFDCs, the eigenvalues, and the eigenvectors were derived based on the eigenstructure assignment. Then, a multiobjective optimization problem was constructed in which the system stability, the robustness to the bias current perturbation, and the maximum amplitudes of the unbalance displacement and control current were considered. Several Pareto solutions were obtained through NSGA-II, and different solutions were selected to compare the performance of the corresponding systems. The simulation and experimental results verify the effectiveness of the proposed OFDCs and the rationality of the proposed design process.

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

Cooperative Rotor Position Estimation of Active Magnetic Bearings with Unsaturated Magnetic Bias

The Effect of Controllers on the Dynamic Behaviour of a Rotor Supported on Active Magnetic Bearings

Feedforward Decoupling Control for Rigid Rotor System of Active Magnetically Suspended High‐speed Motors

Rotor Vibration Control for Magnetic Suspended High-Speed Flywheel Energy Storage System with Inverse System Method and Extended 2-DOF PID Controller

Two-Degree-of-Freedom Control for Active Magnetic Bearing Flywheel Rotor System Based on Inverse System Decoupling

Feedforward decoupling control for magnetically suspended rigid rotor system

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

The Design of the Robust Controller for Active Magnetic Bearings on Active Disturbance Rejection Technology

Active Vibration Control of a Non-collocated AMBs Flexible Rotor System to Pass the First Bending Critical Speed

All-coefficient Adaptive Control of Active Magnetic Bearing System Based on Characteristic Model

Unbalance Compensation by Recursive Seeking Unbalance Mass Position in Active Magnetic Bearing-Rotor System

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Stable Control of Nutation and Precession for the Radial Four-Degree-of-Freedom AMB-Rotor System Considering Strong Gyroscopic Effects

Gain Scheduling Multiobjective Controllers for Active Magnetic Bearing