Abstract:The optimal design of microstructure is the key to further improve the properties of particle reinforced metal matrix composites. In this study, in-situ TiB2 and TiC + TiB2 reinforced Cu matrix composites are used as examples to develop the microstructure-based representative volume element models to describe their damage evolution and strengthening mechanisms. The most critical features including size distribution and morphology of the particles as well as the fracture of metal matrix, brittle damage of ceramic particles and traction-separation debonding of the interface were integrated into the modeling. Simulation results show that the model could well predict the performance of the composite and reveal its damage mechanism. When the particle size is normally distributed, the composite exhibits higher strength due to the size effect of different particles, which is more consistent with the experimental result. Both matrix and ceramic particles in mixed-phase particle reinforced metal matrix composites can be subjected to higher stresses, which results in higher strength of (TiC + TiB2)/Cu composites. Additionally, the spherical TiC particles facilitate the relaxation of stress concentration within the composite, resulting in a synergistic enhancement of strength and ductility. Under compression, localized interface damage first appears around the sharp corners of the hexagonal particles and induces crack initiation toward the matrix. These microcracks are interconnected and propagate along the direction of high stress, eventually leading to the failure of the composite. This work provides the basis and new ideas to reveal the failure mechanism of composites and further optimize their configuration design.

Effect mechanism of mono-particles or hybrid-particles on the thermophysical characteristics and mechanical properties of Cu matrix composites

Effect of Cu and Zn elements on morphology of ceramic particles and interfacial bonding in TiB2/Al composites

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB2/TiN Ceramic Reinforcements

Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Effect of Powder Synthesis Processing on Microstructure and Mechanical Properties of TiB2-TiC Composite Ceramics

Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: Preparation, performance, and mechanisms

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy

The Effect of TiB2 Ceramic Particles on Portevin–Le Chatelier Behavior of TiB2/AlMg Metal Matrix Composites

Numerical evaluation and experimental verification of mechanical properties and fracture behavior for TiB2/Cu composites prepared by in-situ mixing casting

Effect of Pressure on TiB<sub>2</sub>-Cu Composite via In-Situ Reaction Synthesis

Effect of Pressure on TiB<sub>2</sub>-Cu Composite via In-Situ Reaction Synthesis

Effect of pressure on TiB2-Cu composite via in-situ reaction synthesis

Effect of titanium and zirconium carbide interphases on the thermal conductivity and interfacial heat transfers in copper/diamond composite materials

Effect of Ni Additive on the Microstructure of TiB2-Cu Matrix Composites

Effects of TiB2 Particles on Microstructure and Mechanical Properties of an In-Situ TiB2-Al–Cu–Li Matrix Composite

Self-Propagating High-Temperature Synthesis, Microstructure and Mechanical Properties of Tic-Tib2-Cu Composites

The influences of cu content on the self-propagating high temperature synthesized TiC-TiB2 composites

Effect of Cu element on morphology of TiB 2 particles in TiB 2 /Al?Cu composites

Effect mechanism of mono-particles or hybrid-particles on the thermophysical characteristics and mechanical properties of Cu matrix composites

Effect of Cu and Zn elements on morphology of ceramic particles and interfacial bonding in TiB2/Al composites

Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB2/TiN Ceramic Reinforcements

Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Numerical investigations on the hybrid effect and deformation mechanism of TiB2p and TiBw reinforced Cu composites prepared by in-situ mixing casting

Effect of Powder Synthesis Processing on Microstructure and Mechanical Properties of TiB2-TiC Composite Ceramics

Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: Preparation, performance, and mechanisms

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy

The Effect of TiB2 Ceramic Particles on Portevin–Le Chatelier Behavior of TiB2/AlMg Metal Matrix Composites

Numerical evaluation and experimental verification of mechanical properties and fracture behavior for TiB2/Cu composites prepared by in-situ mixing casting

Effect of Pressure on TiB<sub>2</sub>-Cu Composite via In-Situ Reaction Synthesis

Effect of Pressure on TiB&lt;sub&gt;2&lt;/sub&gt;-Cu Composite via In-Situ Reaction Synthesis

Effect of pressure on TiB2-Cu composite via in-situ reaction synthesis

Effect of titanium and zirconium carbide interphases on the thermal conductivity and interfacial heat transfers in copper/diamond composite materials

Effect of Ni Additive on the Microstructure of TiB2-Cu Matrix Composites

Effects of TiB2 Particles on Microstructure and Mechanical Properties of an In-Situ TiB2-Al–Cu–Li Matrix Composite

Self-Propagating High-Temperature Synthesis, Microstructure and Mechanical Properties of Tic-Tib2-Cu Composites

The influences of cu content on the self-propagating high temperature synthesized TiC-TiB2 composites

Effect of Cu element on morphology of TiB 2 particles in TiB 2 /Al?Cu composites

Effect of Pressure on TiB<sub>2</sub>-Cu Composite via In-Situ Reaction Synthesis