Abstract:A novel composite with in situ synthesized of Ti2(Al,Si)C solid solution reinforced Al matrix was fabricated in Ti2AlC-Al-Si material system via one-step solid solution and densification by spark plasma sintering method. The relationship between microstructure, phase composition and mechanical properties of composites doped with different Si content (1, 2 and 3 wt%) and fabricated at different sintering temperature (580, 570 and 560 °C) were investigated. The optimal sintering temperature of composites with increasing the Si addition was carefully determined. The interface reaction was effectively regulated under different Si additions. X-ray photoelectron spectroscopy (XPS) and nanoindentation test results reveal that Si formed SiC covalent bond in Ti2(Al,Si)C solid solution, and with the increase of Si addition, the hardness and elastic modulus of Ti2(Al,Si)C increased by 6.75% and 4.23% in the composites prepared by the three optimal processes. The tensile tests show that when the addition of Si was 2 wt% and the sintering temperature was 570 °C, the composites demonstrated an optimal balance of strength and plasticity. The ultimate tensile strength reached 226 MPa with a strain of 14.33%. Moreover, when added to 3 wt% and the sintering temperature decreased to 560 °C, the composite achieved a significant improvement in elongation. The performance are mainly attributed to the strengthening of Ti2(Al,Si)C solid solution and the regulation of interface reaction.

Effect of in-situ synthesized TiB2 on microstructure and mechanical property of Al/TiB2-SiC interpenetrating phase composites

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Enhanced Mechanical/electrical Properties of in Situ Synthesized SiC-TiB2 Ceramic Composites by Reactive Hot-Pressing Sintering

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Microstructures and mechanical properties of TiB2 composite ceramics with co-addition of Ti and TiC fabricated by SPS

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Effects of Ti3SiC2 on microstructure and properties of TiC0.4 enhanced TiAl matrix composites

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Microstructural evolution and mechanical properties of TiB2/2195 composites fabricated by ultrasonic-assisted in-situ casting

Effect of Ti Content and Stirring Time on Microstructure and Mechanical Behavior of Al-B4C Composites

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Investigation on microstructure and properties of TiC0.5-Al2O3/Cu composites fabricated by a novel in-situ reactive synthesis

In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering

Effects of Ti on the Microstructural Evolution and Mechanical Property of the SiBCN-Ti Composite Ceramics

Interfacial structures and strengthening mechanisms of in situ synthesized TiC reinforced Ti6Al4V composites by selective laser melting