Abstract:The mechanical properties of the aluminum matrix composite directly affect its application in aerospace, transportation, and other industries. In this study, the effect of TiB 2 particles on the comprehensive properties which includes microstructure, thermal deformation behavior, tensile properties, fracture morphology and hardness of Al-Zn-Mg-Cu alloy was analyzed. Furthermore, the microstructures of these alloys were analyzed using energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and a metallography microscope. The stress–strain curves and dynamic softening of the two alloys were studied using the thermal compression test. Furthermore, a thermal processing diagram was constructed for comparing the safety and instability processing zones of the alloys. The Vickers hardness test and the tensile test were performed to compare their hardness, tensile properties, and fracture morphologies. The results demonstrated that TiB 2 was contributing to the refinement of the grain size. When the deformation temperature and the stress–strain rate were 300–450 °C and 0.01–10 s −1 , the alloy exhibited the same stress-strain variation trend during the thermal compression process before and after adding TiB 2 particles. But the deformation resistance of the alloy was improved and processing instability zones were reduced from 300–320 °C/2.5–10 s −1 and 430–450 °C/0.2–0.5 s −1 to 420–450 °C/0.2–1 s −1 because of the addition of TiB 2 particles. TiB 2 particles could also increase the hardness of the alloy by 71.96% and improve the plastic properties and the fracture stress compared with before adding.

Effects of alloy elements (Mg, Zn) on the microstructure and mechanical properties of (TiC+TiB2)/Al composites

Effect of Cu and Zn elements on morphology of ceramic particles and interfacial bonding in TiB2/Al composites

Comparison of the effects of Mg and Zn on the interface mismatch and compression properties of 50 vol% TiB2/Al composites

Effect of Mg on the microstructure evolution and mechanical properties of 5%TiB2/Al−4.5%Cu composites

Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al–Cu–Mg composites with various Mg contents

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effects of Ti3SiC2 on microstructure and properties of TiC0.4 enhanced TiAl matrix composites

Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

Microstructural evolution and hydrogen content and their effect on properties of TiB 2 /Al-Li-X composites with different Li contents

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Microstructure and mechanical properties of Zn based composites reinforced by Ti3AlC2

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Effects of nano-sized TiB2 particles and Al3Zr dispersoids on microstructure and mechanical properties of Al–Zn–Mg–Cu based materials

The Effect of Ti Particles Addition on the Microstructure and Mechanical Behavior of Mg AZ31/Al 6082 Composite Sheets

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Study on the enhancement mechanism of (TiC + B 4 C)/6061Al composite fabricated via vacuum hot-press sintering

Investigation on microstructure and properties of TiC0.5-Al2O3/Cu composites fabricated by a novel in-situ reactive synthesis

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy