Steel slag-KNO 3 phase change composites for thermal storage at medium-high temperature and solid waste recycling

Yuqiao Liu,Zeyi Jiang,Xinru Zhang,Bingji Wu,Yufeng Shen,Liang Wu,Xinxin Zhang

DOI: https://doi.org/10.1016/j.matchemphys.2023.127655

IF: 4.778

2023-03-24

Materials Chemistry and Physics

Abstract:Phase change composites (PCCs) have broad applications in thermal energy storage systems. In this work, we fabricated a series of steel slag-KNO 3 PCCs by mixed sintering, which can be used in the medium-high temperature TES system and have the advantages of solid waste resource utilization. The composite's properties were characterized by determining their compressive strength, Young's modulus, latent heat, thermogravimetric performance, thermal conductivity, and cyclic thermal stability. The results suggested that the steel slag-KNO 3 PCCs possessed good mechanical and thermal properties. When the KNO 3 contents ranged from 38 wt% to 50 wt%, the composites maintained high compressive strength (30–35 MPa) and Young's modulus (1600–1700 MPa). The composites with 50 wt% KNO 3 exhibited a latent heat of 43 J/g in 300–350 °C and a thermal conductivity of about 0.68 W m −1 K −1 . The steel slag-KNO 3 PCCs also presented excellent cyclic thermal stability. After 48 thermal cycles, the composite's latent heat decreased slightly by 2.5–3.7 J/g, and the thermal conductivity increased by 16%–25% compared with that of composites before thermal cycling. This study has important guiding significance for developing medium-high temperature PCCs with low cost and high performance used in TES systems, and may provide a new path for the utilization of solid waste resources.

materials science, multidisciplinary