Abstract:Shape-stabilized phase change materials (SSPCM) offer significant potential in industrial applications, effectively addressing corrosion and thermal stress issues associated with phase change material (PCM) at high temperatures. To advance the large-scale development of SSPCMs, this study innovatively proposes the wet-state extrusion and sintering method to prepare SSPCM particles (SSPCM-P) and characterize them. Solar salt is the PCM, while calcined dolomite is the skeletal support material (SSM). Results indicate successful fabrication of SSPCM-P with salt content below 60 wt% post-sintering, a lower threshold than those achieved via cold-pressing and hot-sintering methods. This is because, during wet mixing and evaporation, salts migrate to the surface of the sample and mixtures with high salt content on the surface tend to bond together during sintering. SEM observations reveal a transparent interface between SSM and PCM pre-sintering, whereas post-sintering, PCM uniformly adheres to the SSM surface, with smaller particle sizes demonstrating enhanced densification. SSPCM-P shows commendable chemical stability, with the enthalpy of melting/solidification for SSPCM-P with 60 % salt content slightly below the theoretical value at 63.6/63.3 J/g. Charging and discharging experiments highlight significantly improved thermal properties of SSPCM-P compared to sensible heat materials, enabling oil heating to higher temperatures. SSPCM-P can maintain stability during recirculation. Furthermore, it is noted that SSPCM-P is unsuitable for vapour applications due to salt precipitation, making direct contact heat transfer with vapour unfeasible. As a solution, the study proposes the application of SSPCM-P in finned tube heat exchangers to circumvent chemical incompatibility issues with heat transfer fluid, leveraging its compact size, ease of preparation, and stacking capabilities. These pivotal findings present new industrial solutions for SSPCM preparation, promising significant technological advancements in energy storage and heat transfer.

Modification of Steel Slag to Prepare Chlorides Based Composite Phase Change Materials with Shape Stability for High-Temperature Thermal Energy Storage

Preparation and characterization of steel slag-based low, medium, and high-temperature composite phase change energy storage materials

Research on NaCl-KCl High-Temperature Thermal Storage Composite Phase Change Material Based on Modified Blast Furnace Slag

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Novel Low-Cost Anorthite Porous Ceramic-Based Binary Chlorate High-Temperature Thermal Energy Storage Material: Preparation and Characterization

Novel low-cost steel slag porous ceramic-based composite phase change material: An innovative strategy for comprehensive utilization of steel slag resources

Steel slag-KNO 3 phase change composites for thermal storage at medium-high temperature and solid waste recycling

Numerical simulation and optimization of phase change heat storage units using Slag-Based composite phase change materials

High-temperature (800 °C) Performance of Spodumene Slag-Based Ternary Sulphate Composite Phase Change Materials with Improved Mechanical Property

Inorganic salt based shape-stabilized composite phase change materials for medium and high temperature thermal energy storage: Ingredients selection, fabrication, microstructural characteristics and development, and applications

Ceramic–molten salt composites (CPCMs) for high-temperature thermal energy storage: Improving sinterability and thermal stability by using solid wastes as skeletons

Calcium chloride hexahydrate based supercooling phase change material for a long-term recovery of low-grade thermal energy

Preparation and characterization of shape-stable phase change particles: A new option for high-temperature thermal energy storage

CH3COONa·3H2O/flaky modified vermiculite composite phase change materials enhanced phase change behavior and thermal storage through curing lotus root starch modification

Gold tailings-solar salt shape-stabilized phase change materials for medium-high temperature thermal energy storage

Studies of eutectic hydrated salt/polymer hydrogel composite as form-stable phase change material for building thermal energy storage

Comprehensive thermal properties of ternary eutectic molten salt/nanoparticles composite phase change materials for high–temperature thermal energy storage

A novel composite for thermal energy storage from alumina hollow sphere/paraffin and alkali-activated slag

High-temperature modification of steel slag using composite modifier containing silicon calcium slag, fly ash, and reservoir sediment

Mechanism and Performance of Composite Phase Change Materials from the Direct Hydrolysis Residue of Municipal Sludge Loaded with Sodium Acetate Trihydrate

Preparation and performance characterization of steel slag-based thermal storage composites for waste recycling and thermal energy storage