Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

High Thermal Conductivity and Mechanical Strength Phase Change Composite with Double Supporting Skeletons for Industrial Waste Heat Recovery

Constructing heat conduction path and flexible support skeleton for PEG-based phase change composites through salt template method

Green, recyclable and high latent heat form-stable phase change composites supported by cellulose nanofibers for thermal energy management

Phase change material with anisotropically high thermal conductivity and excellent shape stability due to its robust cellulose/BNNSs skeleton

Biomass porous carbon/polyethylene glycol shape-stable phase change composites for multi-source driven thermal energy conversion and storage

Unidirectional thermal conduction in electrically insulating phase change composites for superior power output of thermoelectric generators

High Thermally Conductive Shape-Stabilized Phase Change Composites with Dual-Aligned Carbon Nanofiber Scaffolds

Fibrous form-stable phase change materials with high thermal conductivity fabricated by interfacial polyelectrolyte complex spinning.

Robust BNNS/ANF Aerogel Skeleton-Based PEG Composite Phase Change Materials with High Latent Heat for Efficient Thermal Management

Form-stable phase change composites with high thermal conductivity and adjustable thermal management capacity

Carbon-based Phase Change Composites with Directional High Thermal Conductivity for Interface Thermal Management

Form-Stable phase change composites based on porous carbon derived from polyacrylonitrile hydrogel

High Thermal Conductive Shape-Stabilized Phase Change Materials of Polyethylene Glycol/boron Nitride@chitosan Composites for Thermal Energy Storage

High-enthalpy aramid nanofiber aerogel-based composite phase change materials with enhanced thermal conductivity

High thermal conductivity and low leakage phase change materials filled with three-dimensional carbon fiber network

PEG-based polyurethane/ Paraffin@SiO2/ Boron nitride phase change composite with efficient thermal conductive pathways and superior mechanical property

Vertically Oriented Boron Nitride/silicon Carbide Scaffold for Thermal-Conductive and Electrical-Insulating Phase Change Composites

Polyethylene Glycol Infiltrated Biomass-Derived Porous Carbon Phase Change Composites for Efficient Thermal Energy Storage

Absorption-polymerization method for synthesizing phase change composites with high enthalpy and thermal conductivity for efficient thermal energy storage

Shape-stabilized nanosilver-modified grapefruit peel-based porous carbon composite phase change material with high thermal conductivity, photothermal conversion performance and thermal management capability

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage