Abstract:Formation mechanism of the composite phase change material: A composite phase change material was prepared using bamboo charcoal (BC) embedded with polyethylene glycol (PEG) as PCM and low density polyethylene (LDPE) as matrix. Phase change materials (PCMs) are often used as building materials to reduce the energy consumption. However, conventional PCMs are susceptible to leakage and have a short service life. To solve this problem, thermal energy storage (TES) composites were fabricated by using bamboo charcoal (BC) encapsulating polyethylene glycol (PEG) as the PCM and low density polyethylene (LDPE) as the matrix. The shape and structure of BC and BC‐plastic composites were examined using scanning electron microscopy, X‐ray diffractometry, and mercury intrusion porosimetry. Differential scanning calorimetry, thermogravimetry (TG), and infrared thermography were used to characterize the manufactured TES composites. Physical and mechanical strength assessments were also conducted. The results demonstrated that: (1) BC possessed a rich void structure with a porosity of 61.4%, which could be used to adsorb PEG and the composites was a combination of PEG, BC, and LDPE with no chemical reaction; (2) thermal tests demonstrated that the composites exhibited favorable temperature regulation properties, featuring a maximum latent heat capacity of 29.1 J/g along with suitable phase change temperatures, yet thermal durability needs to be improved much further, addition of PEG reduced thermal conductivity of the composite from 0.38 to 0.34 W/mK; (3) the addition of PEG was beneficial for the impact strength but had a negative impact on the flexural and tensile properties; and (4) due to their satisfactory thermal performance and acceptable mechanical properties, these TES composites can be effectively utilized as building materials for temperature control purposes. Highlights Bamboo charcoal (BC) had a large number of pores that can encapsulate polyethylene glycol (PEG). PEG/BC performed satisfactory latent heat. Low density polyethylene was used as the matrix to realize the second encapsulation of phase change material. Thermal energy storage composites had excellent stability and good heat storage capacity. PEG incorporation negatively affected flexural and tensile properties.

Enhanced properties of stone coal-based composite phase change materials for thermal energy storage

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Investigation on thermal properties of capric–palmitic–stearic acid/activated carbon composite phase change materials for high-temperature cooling application

Enhancement of Thermo-Physical Properties of Expanded Vermiculite-Based Organic Composite Phase Change Materials for Improving the Thermal Energy Storage Efficiency

Enhanced thermal properties of stearic acid/carbonized maize straw composite phase change material for thermal energy storage in buildings

Novel composite phase change material of high heat storage and photothermal conversion ability

Preparation and thermal performance enhancement of sodium thiosulfate pentahydrate- sodium acetate trihydrate /expanded graphite phase change energy storage composites

Stearic acid/expanded graphite composite phase change material with high thermal conductivity for thermal energy storage

Carbonized-wood based composite phase change materials loaded with alumina nanoparticles for photo-thermal conversion and energy storage

Balsa-based porous carbon composite phase change material with photo-thermal conversion performance for thermal energy storage

MXene-decorated bio-based porous carbon composite phase change material for superior solar-thermal energy storage and thermal management of electronic components

Tailoring Thermal Properties Via Synergistic Effect in a Multifunctional Phase Change Composite Based on Methyl Stearate

CH3COONa·3H2O/flaky modified vermiculite composite phase change materials enhanced phase change behavior and thermal storage through curing lotus root starch modification

Plastic composite of bamboo charcoal stabilized polyethylene glycol with thermal energy storage and temperature regulation for building energy efficiency

Multifunctional response of biomass carbon/sodium sulfate decahydrate composite phase change materials

Effect of phase change microcapsules on the properties of whisker-reinforced phosphogypsum-based composites

Preparation and characterization of innovative cement mortar incorporating fatty acid/expanded graphite composite phase change material for thermal energy storage

Phase change composites derived from chromium‐containing leather solid waste for efficient solar‐thermal energy storage

Preparation and application of composite EG/Ba(OH)2·8H2O form‐stable phase change material for solar thermal storage

Enhanced thermal performance of NaCH3COO·3H2O-Na2S2O3·5H2O eutectic based composite phase change materials with hybrid dimensional carbon nanomaterials and modified lotus root starch

Stearic Acid/expanded Graphite As a Composite Phase Change Thermal Energy Storage Material for Tankless Solar Water Heater