Design and Synthesis of Band-Pass Frequency Selective Surface With Wideband Rejection and Fast Roll-Off Characteristics for Radome Applications
Ning Liu,Xianjun Sheng,Chunbo Zhang,Dongming Guo
DOI: https://doi.org/10.1109/tap.2019.2955665
IF: 5.7
2020-04-01
IEEE Transactions on Antennas and Propagation
Abstract:In this article, we proposed an equivalent circuit-based design to synthesizing second-order band-pass frequency selective surfaces (FSSs) with wide out-of-band rejection and fast roll-off characteristics. An equivalent circuit model (ECM) is established in order to depict the desired frequency response. Then, based on the ECM, a generalized composite structure comprised of three FSS arrays separated by two dielectric substrates is proposed. The main advantage of this method is that it allows us to acquire optimized structural parameters according to the desired frequency response. With this method, an FSS based on the proposed composite structure is designed. The designed FSS can provide a second-order pass-band within the stop-band ranging from 1 to 40 GHz and the pass-band is operating at 10 GHz with 12% fractional bandwidth. Meanwhile, the bandwidth of the two transitional bands on both sides of the pass-band is only 0.26 and 0.6 GHz, respectively. Also, the frequency response of the designed FSS is stable at 60° for both TE and TM polarizations. For further verification, an FSS prototype is fabricated and experimentally characterized. Good agreements between the simulated and measured results can be observed.
telecommunications,engineering, electrical & electronic