Abstract:The thermal elastic hydro dynamic（TEHD） lubrication analysis for the thrust bearing is usually conducted by combining Reynolds equation with finite element analysis（FEA）. But it is still a problem to conduct the computation by combining computational fluid dynamics（CFD） and FEA which can simulate the TEHD more accurately. In this paper, by using both direct and separate coupled solutions together, steady TEHD lubrication considering the viscosity-temperature effect for a bidirectional thrust bearing in a pump-turbine unit is simulated combining a 3D CFD model for the oil film with a 3D FEA model for the pad and mirror plate. Cyclic symmetry condition is used in the oil film flow as more reasonable boundary conditions which avoids the oil temperature assumption at the leading and trailing edge. Deformations of the pad and mirror plate are predicted and discussed as well as the distributions of oil film thickness, pressure, temperature. The predicted temperature shows good agreement with measurements, while the pressure shows a reasonable distribution comparing with previous studies. Further analysis of the three-coupled-field reveals the reason of the high pressure and high temperature generated in the film. Finally, the influence of rotational speed of the mirror plate on the lubrication characteristics is illustrated which shows the thrust load should be balanced against the oil film temperature and pressure in optimized designs. This research proposes a thrust bearing computation method by combining CFD and FEA which can do the TEHD analysis more accurately.

Study on influence of pad surface defects on lubrication characteristics of thrust bearing

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Experimental Study on Multi-Decked Protuberant Foil Thrust Bearing with Different Number of Thrust Pads

Research on Thermal Transient Deformation Mechanism and Suppression Method of Thrust Pad

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

CFD analysis for static and dynamic characteristics of hydrodynamic thrust bearings

Effects of support structure on lubricating properties of bi-directional thrust bearings

Analysis on the Thrust Bearing Lubrication in Pumped Storage Unit Based on Fluid-Solid-thermal Interactions

A Review on the Large Tilting Pad Thrust Bearings in the Hydropower Units

Influence of Installation Deviation of Thrust Bearing on Oil Film Flow of 1000 MW Hydraulic Turbine Unit

Tehd Analysis Of A Bidirectional Thrust Bearing In A Pumped Storage Unit

Thermo-hydrodynamic Lubrication and Energy Dissipation Mechanism of a Pump-Turbine Thrust Bearing in Load-Rejection Process

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Alleviating thermal challenges in hydrodynamic bearings: A Novel approach through thrust bearing pads with embedded cooling circuitry and deep Recess

Theoretical and Experimental Study on the Static and Dynamic Characteristics of Tilting-Pad Thrust Bearing

Influence of Centrifugal Deformation of Thrust Collar in Water-lubricated Tilting-pad Thrust Bearings of Nuclear Canned Pump

Transient TEHD Analysis of a Thrust Bearing Based on Two-Way Fluid-Solid-Thermal Interaction

3D Two-Way Coupled Tehd Analysis on the Lubricating Characteristics of Thrust Bearings in Pump-Turbine Units by Combining Cfd and Fea

Influence on temperature profile in an oil film in thrust bearings using an embedded cooling circuitry beneath the pad surface: An experimental investigation

Three-dimensional TEHD Analysis of Bi-directional Thrust Bearing in Pump-turbine