Abstract:This paper discusses the problems of resistance of the metal of the tubing branch pipe (tubing) to the process of its destruction in a medium containing hydrogen sulfide and when exposed to external forces. A 73х73 tubing nozzle made of 38G2SFA steel was selected as the material for research. The tubing fragment was destroyed during production well operation. To establish the reasons for the failure of the tubing nozzle, a visual inspection was carried out, tests were performed to assess the hardness and mechanical properties, the microstructure and microtexture of the metal were analyzed using scanning electron microscopy (SEM) methods. To analyze the nature of the distribution of introduced defects, the mutual orientation of structural components and crystallographic texture, studies were carried out by the method electron backscatter diffraction (EBSD). Studies of the suspended branch pipe, which does not have chemical protection, showed that the cause of its destruction was hydrogen sulfide stress corrosion cracking (SSCC) as a result of hydrogen embrittlement and the action of external tensile forces exceeding the yield strength of the metal. It was established that as a result of the interaction of hydrogen sulfide of the distilled product with the metal of the branch pipe, hydrogen embrittlement of the material of the branch pipe occurred. The process of hydrogen embrittlement of the fragment was proved by detecting hydrogen blisters in the metal microstructure and establishing the process of coalescence of neighboring inclusions. In addition, the results of the test to measure the hardness of the metal along the wall thickness further supported the hypothesis of hydrogen embrittlement of the tubing. EBSD analysis showed that the threaded part of the branch pipe is characterized by a small size of structural elements and an increased density of introduced defects (geometrically necessary dislocations), which are a promising site for the deposition of molecular hydrogen. It is concluded that reaching the limit concentration of molecular hydrogen reduces the binding energy of metal atoms and this process initiates the formation of pores. It has been established that the development of cracks along large-angle grain boundaries is facilitated, and small-angle and coincidence site lattice (Σ3, Σ5, Σ11 and Σ13b) grain boundaries are active barriers to crack propagation. It has been shown that by optimizing the elemental composition of steel, controlling the microstructure, crystallographic texture, as well as the type and state of grain boundaries, new pipeline steels can be produced that are more resistant to SSCC.

Sulphide Stress Corrosion in SAE 1070 Steel Wire used in the Tensile Armour of Flexible Pipelines: Effect of Induced Superficial Defects

Sulfide Corrosion Cracking of Linepipe for Sour Gas Service

H2S Stress Corrosion Tests of Welded Joint for X65 Pipeline Steel and Finite Element Numerical Analysis of Crack Tip

Effect of H2S Corrosion on the Fracture Toughness of the X80 Pipeline Steel Welded Joint

Determining the influence of an artificial defect on the mechanical properties of a flexible pipeline material during a rupture test

Effect of CO2/H2S and Applied Stress on Corrosion Behavior of 15cr Tubing in Oil Field Environment

Study on Stress Corrosion Cracking Behavior of Incoloy825/X65 Bimetallic Composite Pipe Welded Joint in Wet Hydrogen Sulfide Environment

Corrosion Of High-Strength Steel Wires Under Tensile Stress

Analysis Cracking Corrosion on Carbon Steel Pipes API 5L-X65 In Solution 7700 ml Aquades, 250 ml Acetic Acid and 50 ml Ammonia with Gas CO2 and H2S in Saturation Condition

Influence of FeCO 3 and FeSO 4 Layers on Corrosion in Sulfuric Acid Medium of Eutetoid Steels

RESISTANCE OF FERRITE-PERLITE STEEL TUBING BRANCH PIPE METAL TO DESTRUCTION IN HYDROGEN SULFIDE MEDIUM

Sulphide Stress Cracking Behaviour of the Dissimilar Metal Welded Joint of X60 Pipeline Steel and Inconel 625 Alloy

Hydrogen embrittlement susceptibility of AISI 4140 alloy-steel under cathodic protection and in H 2 S and CO 2 environment

Corrosion Behavior and Mechanical Performance of Drill Pipe Steel in a CO2/H2S-Drilling-Fluid Environment

Exploring the susceptibility of P110 pipeline steel to stress corrosion cracking in CO2-rich environments

Peculiarities of Fatigue Crack Growth in Steel 17H1S after Long-Term Operations on a Gas Pipeline

Fracture behavior of SPV50Q steel weldment in hydrogen sulfide

Hydrogen Stress Cracking Resistance of Seamless Pipes for Hydrogen Storage and Transport Applications

Explosion Cracking Analysis of Sulfur Resistance Induction Heat Bend Pipe

Mechanical Property, HIC and SSCC Test Analysis of L245NS Anti-Sulfur Bending Pipe

Assessment of sulfide corrosion cracking and hydrogen permeation behavior of ultrafine grain high strength steel