Abstract:The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

Design considerations of series type hybrid circuit breaker (S‐HCB)

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

A Single-Coupling-Injection Series-Type Hybrid Circuit Breaker Using Diode Clamping Switching

A Series-Type Dual-Coupled-Inductors based Hybrid Circuit Breaker with Simple Start-Up Operation and Adaptive Reclosing Capability

A Hybrid Circuit Breaker with Fault Current Limiter Circuit in a VSC-HVDC Application

A Medium-Voltage Hybrid DC Circuit Breaker, Part I: Solid-State Main Breaker Based on 15 Kv SiC Emitter Turn-OFF Thyristor

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Novel Hybrid DC Circuit Breaker Based on Series Connection of Thyristors and IGBT Half-Bridge Submodules

Parameter Designing of the DC Hybrid Circuit Breaker

Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker

A novel current-limiting hybrid DC breaker based on thyristors

A Scheme for Current-limiting Hybrid DC Circuit Breaker

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

A Novel Series-Type Hybrid Circuit Breaker With Simple Start-Up Operation and Low Device Cost for Low-Voltage DC Distribution Networks

Superconducting Magnetic Energy Storage-Based DC Circuit Breaker for HVDC Applications

The Design and Development of a Novel 10 Kv/60 Ka Hybrid DC Circuit Breaker Based on Mixed Solid-State Switches

Design and Test of the Bidirectional Solid-State Switch for an 160kv/9ka Hybrid DC Circuit Breaker

A State-of-the-Art 500-Kv Hybrid Circuit Breaker for a Dc Grid: the World's Largest Capacity High-Voltage Dc Circuit Breaker

Hybrid MVDC Circuit Breaker Based on Enhanced Arc Voltage of Vacuum Interrupter

A multiport hybrid DC circuit breaker with high economic efficiency and adaptive reclosing capability

Development of a Thyristor-Assisted Hybrid DC Circuit Breaker for Reduced Cost and Size