Abstract:As the essential component of a quantum dot-sensitized solar cell (QDSC), the counter electrode (CE) plays an important role in electron transfer and catalytic reduction acquisition throughout the device. A novel route to design multilayer functionalized Cu2S thin films as CEs with high catalytic activity and enhanced stability, as well as large specific surface area and high conductivity, is presented. Firstly, Mo-based films were prepared by magnetron sputtering on a glass substrate, and then porous CuZnMo conductive films were formed by etching with hydrochloric acid. Secondly, indium tin oxide (ITO) film was sputtered onto the porous structure to act as a protective layer, and a porous ITO/CuZnMo structured film was obtained after optimization. In the third step, multilayer Cu(x)/ITO/CuZnMo structured films were acquired by sputtering Cu films. Finally, multilayer Cu2S(t)/ITO/CuZnMo functionalized film CEs were obtained via in situ sulfidation of sputtered Cu films. The functions of conduction and resistance to electrolyte corrosion were produced and enhanced by annealing an ITO layer at high temperature prior to Cu deposition, while catalytic activity enabled by Cu2S was realized from Cu film sulfidation. The multilayer Cu2S/ITO(500 °C)/CuZnMo functionalized films exhibit high catalytic activity and enhanced stability for resistance to electrolyte corrosion. Taking multilayer Cu2S/ITO(500 °C)/CuZnMo films as CEs, the QDSCs demonstrated good stability of power conversion efficiency (PCE) after 500 h of irradiation, from an initial 4.21% to a final 4.00%. Furthermore, the thickness of Cu2S film modulated by the duration of Cu sputtering was investigated. It was found that the QDSCs using multilayer Cu2S(40 min)/ITO/CuZnMo functionalized film with a Cu2S thickness of 1.2 μm as CE exhibit the best performance, and the R ct value was 0.57 Ω. The best photovoltaic performance with a PCE of 5.21% (V oc = 533.1 mV, J sc = 18.80 mA cm-2, FF = 52.84%) was achieved under AM 1.5 radiation with an incident power of 100 mW cm-2. This design of a multilayer functionalized CE introduces potential alternatives to the common brass-based CE for long-term QDSCs with high performance.

Structurally optimized intrinsic defect carbon driven polysulfide reduction reaction for quantum dot sensitized solar cells

Defect Passivation and Electrical Conductivity Enhancement in Perovskite Solar Cells Using Functionalized Graphene Quantum Dots

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Defect-Laden MoSe2Quantum Dots Made by Turbulent Shear Mixing As Enhanced Electrocatalysts

Quantitatively regulating defects of 2D tungsten selenide to enhance catalytic ability for polysulfide conversion in a lithium sulfur battery

Band Structure Engineering and Defect Passivation of Cu x Ag 1– x InS 2 /ZnS Quantum Dots to Enhance Photoelectrochemical Hydrogen Evolution

One-Step Electrochemical Deposition of Hierarchical Cus Nanostructures on Conductive Substrates As Robust, High-Performance Counter Electrodes for Quantum-Dot-Sensitized Solar Cells

CO 2 Photoreduction Catalyzed by Cu-Deficient Cu 1.95 S@CuS: Enhanced Performance via Boosted Directional Interfacial Charge Transfer

A novel strategy to design a multilayer functionalized Cu2S thin film counter electrode with enhanced catalytic activity and stability for quantum dot sensitized solar cells

Zeolitic-imidazolate frameworks derived Pt-free counter electrodes for high-performance quantum dot-sensitized solar cells

Intrinsic defects promote rapid conversion of polysulfides on carbon surface to achieve high rate performance

Quantitative defect regulation of heterostructures for sulfur catalysis toward fast and long lifespan lithium-sulfur batteries

In situ sulfidation of porous sponge-like CuO/SiW 11 Co into Cu 2 S/SiW 11 Co as stabilized and efficient counter electrode for quantum dot-sensitized solar cells

Phosphorization-Introduced Defect-Rich Phosphorus-Doped Co 3 O 4 with Propelling Adsorption–Catalysis Transformation of Polysulfide

Fe Single Atom Catalysts Promoting Polysulfide Redox Reduction in Quantum Dot Photovoltaics

Hierarchical Cu7S4 Nanotubes Assembled by Hexagonal Nanoplates with High Catalytic Performance for Quantum Dot-Sensitized Solar Cells

Unusual Formation of CoS 0.61 Se 0.25 Anion Solid Solution with Sulfur Defects to Promote Electrocatalytic Water Reduction

Defect-Mediated Electron-Hole Separation in One-Unit-Cell Znin2s4 Layers for Boosted Solar-Driven Co2 Reduction

Accelerating Electron-Transfer and Tuning Product Selectivity Through Surficial Vacancy Engineering on CZTS/CdS for Photoelectrochemical CO2 Reduction

Single-Atom Phosphorus Defects Decorated CoP Cocatalyst Boosts Photocatalytic Hydrogen Generation Performance of Cd0.5 Zn0.5 S by Directed Separating the Photogenerated Carriers

Study of Quantum Dot/Inorganic Layer/Dye Molecule Sandwich Structure for Electrochemical Solar Cells