Abstract:Despite silicon carbide’s (SiC’s) high breakdown electric field, high thermal conductivity and wide bandgap, it faces certain reliability challenges when used to make conventional power device structures like power MOS-based devices, bipolar-mode diodes and thyristors, and Schottky contact-based devices operating at high temperatures. The performance and reliability issues unique to SiC discussed here include: (a) MOS channel conductance/gate dielectric reliability trade-off due to lower channel mobility as well as SiC–SiO2 barrier lowering due to interface traps; (b) reduction in breakdown field and increased leakage current due to material defects; and (c) increased leakage current in SiC Schottky devices at high temperatures.Although a natural oxide is considered a significant advantage for realizing power MOSFETs and IGBTs in SiC, devices to date have suffered from poor inversion channel mobility. Furthermore, the high interface state density presently found in the SiC–SiO2 system causes the barrier height between SiC and SiO2 to be reduced, resulting in increased carrier injection in the oxide. A survey of alternative dielectrics shows that most suffer from an even smaller conduction band offset at the SiC–dielectric interface than the corresponding Silicon–dielectric interface and have a lower breakdown field strength than SiO2. Thus, an attractive solution to reduce tunneling such as stacked dielectrics is required.In Schottky-based power devices, the reverse leakage currents are dominated by the Schottky barrier height, which is in the 0.7–1.2eV range. Because the Schottky leakage current increases with temperature, the SiC Schottky devices have a reduction in performance at high temperature similar to that of Silcon PN junction-based devices, and they do not have the high temperature performance benefit associated with the wider bandgap of SiC.Defects in contemporary SiC wafers and epitaxial layers have also been shown to reduce critical breakdown electric field, result in higher leakage currents, and degrade the on-state performance of devices. These defects include micropipes, dislocations, grain boundaries and epitaxial defects. Optical observation of PN diodes undergoing on-state degradation shows a simultaneous formation of mobile and propagating crystal stacking faults. These faults nucleate at grain boundaries and permeate throughout the active area of the device, thus degrading device performance after extended operation.

Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: A review

Advances in SiC materials and devices: an industrial point of view

Progress in Research on Wide Band-Gap Semiconductor SiC and Its Application

Status of Silicon Carbide Micromachining, Circuits and Sensing Devices

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Fulfilling the Promise of High-Temperature Operation with Silicon Carbide Devices: Eliminating bulky thermal-management systems with SJTs

Status and Prospects of Cubic Silicon Carbide Power Electronics Device Technology

SiC sensors: a review

Bidirectional Current 4h‐sic VJFET

SiC devices: physics and numerical simulation

Reliability Issues of SiC MOSFETs: A Technology for High-Temperature Environments

Emerging SiC Applications beyond Power Electronic Devices

Advances in SiC power MOSFET technology

One-dimensional SiC Nanostructures: Designed Growth, Properties, and Applications

Prospects for SiC electronics and sensors

Silicon carbide MEMS for harsh environments

Recent Progress on Single-Crystal Growth and Epitaxial Growth of 4H Silicon Carbide

SiC materials-progress, status, and potential roadblocks

Recent progress of SiC power devices and applications

Recent advances in silicon carbide MOSFET power devices

Reliability and performance limitations in SiC power devices