Abstract:The static drill rooted nodular (SDRN) pile is a new type of composite pile that consists of a precast pile and surrounding cemented soil. Its cost advantages and environmentally friendly construction have been proven in applications in Southeast China. Moreover, the composition of pipe pile and nodular pile is based on the load transfer mechanisms of a pile foundation, which is effective in optimal design. This paper presents a field study on the behavior of SDRN piles under compression. The load-displacement response, axial force, mobilized load of pile cap, skin friction, and tip resistance of the composite pile are discussed. Here, the bilinear base load-displacement model was adopted to analyze the test results. It is found that providing caps on the static drill rooted piles takes full advantage of the static drill rooted method, and drilling and grouting into the soil beneath the cap, which can be considered a type of ground improvement treatment, can increase the bearing capacity of the pile cap; thus, setting a pile cap for this type of piles is recommended. The existence of the caps in the field tests decreased the skin friction of the upper part of pile shaft because of the additional settlement of the surrounding soil, which developed owing to the pressure from the caps. The frictional capacity of the concrete-cemented soil interface was much higher than that of the cemented soil-soil interface. The skin friction of the lower part of the pile shaft was about 1.25 times in clayey soil and 2.0 times in sandy soil compared with the bored pile. It can be concluded that the cemented soil-soil interface of the SDRN pile was probably better than the concrete-soil interface of the bored pile. The test results fitted the first stage curve of the bilinear model well, and it can be supposed that the base soil was strengthened because of the permeation of the cement paste.

Field Study on Bearing Capacity of Large-Diameter Rock-Socketed Bored Piles with Combined Grouting in Highly Weathered Rock Layers

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Vertical bearing capacity of rock-socketed pile with enlargement at pile end

Vertical Bearing Capacity of Large-Diameter Bored Pile

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Field study on the behavior of pre-bored grouted planted pile with enlarged grout base

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Experimental study on vertical bearing performance of base post-grouted cast-in-place plies in soft soils

Research on Bearing Capacity of Post-grouting Super-long Bored Pile

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

A Novel Method for Testing the Effect of Base Post-Grouting of Super-Long Piles

Field investigations on bearing characteristics of composite post-grouting piles in clastic rock layers

Field test research on post-grouting effect for super-long cast-in-place bored pile in thick soft foundation

Experimental Study on Post-Grouting Pile Vertical Bearing Performance Considering Different Grouting Methods and Parameters in Cohesive Soil

Field Tests on Behavior of Pre-Bored Grouted Planted Pile and Bored Pile Embedded in Deep Soft Clay

Vertical compressive bearing performance and optimization design method of large-diameter manually-excavated rock-socketed cast-in-place piles

A test on base bearing capacity of static drill rooted nodular pile

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

A Field Study on the Behavior of Static Drill Rooted Nodular Piles with Caps under Compression

Field tests of large-diameter rock-socketed bored piles based on the self-balanced method and their resulting load bearing characteristics