Abstract:Calcium treatment is a well established method to transform oxide and sulphide inclusions in steel to less harmful inclusions which can have beneficial effects on properties. Transformation of solid alumina clusters to liquid calcium aluminates by calcium is a much used technique to avoid nozzle blocking in continuous casting of aluminium deoxidised steels. Calcium treatment is also a key method to improve machinability, which can be further improved by increased sulphur content. Resulphurised steels, however, tend to have casting problems due to deficient modification of oxides or formation of solid CaS inclusions which also have a tendency to clog the nozzle. In this study, the formation and transformation of liquid and solid inclusions containing oxidic and sulphidic components were examined by thermodynamic calculations. A quasichemical slag model was applied to calculate equilibrium oxide and sulphide inclusions in steel. Calculations were carried out over a wide temperature range to study the formation of species in the melt corresponding to ladle treatment conditions as well as casting. To examine inclusion behaviour during casting and solidification, the interdendritic solidification model, IDS, was coupled with thermodynamic equilibrium calculations. The results show the conditions in which liquid inclusions can be formed with calcium treatment. The calculations were performed at different temperatures and varying calcium, aluminium and sulphur contents. The effect of total oxygen content was also studied. The main components in liquid calcium aluminates were CaO and Al2O3 plus some SiO2 and CaS. The stability relations of different compounds alter as a function of temperature. An abrupt change occurs during solidification when the partition of the inclusion forming elements between the liquid and solid iron phases are taken into account.

Evolution and Transformation of Inclusions in Calcium-Treated Low-Carbon Si–Mn-Killed Steel

Evolution of Inclusions in Si-Mn-Killed Steel During Ladle Furnace (LF) Refining Process

Effect of calcium treatment on evolution of inclusions in low-carbon aluminum-killed steel

Inclusion Evolution after Calcium Addition in Low Carbon Al-Killed Steel with Ultra Low Sulfur Content

Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel

Formation Mechanism of High‐MnO‐Content SiO2/SiO2–MnO–(CaO–Al2O3) Dual‐Phase Inclusions in Si–Mn‐Killed Steel

Formation Mechanism of CaS-Bearing Inclusions and the Rolling Deformation in Al-Killed, Low-Alloy Steel with Ca Treatment

Effects of Calcium Addition on Nonmetallic Inclusions in High‐Al Steel

Evolution of Non-metallic Inclusions in Si-Ca-Ba-Killed Heavy Rail Steel During Secondary Refining Process

Evolution mechanism of inclusions during refining and continuous casting process of 321H stainless steel

Effect of Calcium Addition on Oxide and Sulfide Inclusions in Heavy Steel Ingot Simulated by Lab Experiments

Evolution of Inclusions and Associated Microstructure in Ti–Mg Oxide Metallurgy Steel

The Effect of Aluminum Addition on the Evolution of Inclusions in an Aluminum-Killed Calcium-Treated Steel

Synergistic Effect of Calcium and Barium on Non-metallic Inclusions Modification and Improvement in Steel Cleanliness

Evolution of oxide and nitride inclusions during processing of stainless steel

Thermodynamic Evaluation of Inclusion Formation during Cooling and Solidification of Low Carbon Si-Mn Killed Steel

Evolution behaviour of nonmetallic inclusions in Ti-bearing 11Cr stainless steel with calcium treatment

Evolution Of Nonmetallic Inclusions In Pipeline Steel During Lf And Vd Refining Process

Transient Behavior and Thermodynamics of Inclusions in Al-Ti-Deoxidized and Ca-Treated Steel

Transformation of Inclusions in Linepipe Steels During Heat Treatment

Thermodynamic and Kinetic Analysis of Non-Metallic Inclusions Evolution in Si-Killed 316L Stainless Steel with Various Refining Slags