Abstract:Effects of varied levels of cerium (28 × 10–6, 65 × 10–6 and 150 × 10–6) on inclusions in a high-carbon chromium bearing steel at different stages (before adding cerium, after adding cerium for 1, 5, 10 min and ingot) were studied using laboratory experiments. An automatic scanning electron microscope system with energy-dispersive spectroscopy was used to analyze the amount, composition, size and morphology of inclusions in the steel at different stages. When the cerium content in the molten steel increased from 0 to 150 × 10–6, the evolution sequence of inclusions was as follows: Al2O3 → CeAl11O18 → CeAlO3 → Ce2O2S. After 28 × 10–6 cerium was added, Al2O3 inclusions were modified into CeAl11O18 inclusions in the molten steel and then were further transformed into Al2O3 and CeAlO3 inclusions in the solid steel during cooling. With the addition of 65 × 10–6 cerium, inclusions in the molten steel were modified into CeAlO3 and a small number of Ce2O2S inclusions. When the addition amount of cerium increased to 150 × 10–6, inclusions were transformed to Ce2O2S. The size of inclusions in the molten steel decreased obviously with cerium addition. On the other hand, the size of inclusions increased during the cooling process in solid steels of No. 1 steel (with 28 × 10–6 cerium) and No. 2 steel (with 65 × 10–6 cerium). During the cooling process, unmodified MnS inclusions were precipitated in the solid steel of No. 1 steel and wrapped outside the Al2O3 and CeAlO3 inclusions to form large complex inclusions. During the cooling process of No. 2 steel, the inclusion size of CeAlO3 increased due to the collision and polymerization. In the No. 3 steel (with 150 × 10–6 cerium), the average size of inclusions decreased rapidly and remained at a lower size during the cooling process, which was beneficial to improving the fatigue life of the steel.

Synergistic Effect of Calcium and Barium on Non-metallic Inclusions Modification and Improvement in Steel Cleanliness

Thermodynamic features of the modifi cation of non-metallic inclusions by calcium in low-carbon steels deoxidized by aluminum

Effect of Calcium Addition on Oxide and Sulfide Inclusions in Heavy Steel Ingot Simulated by Lab Experiments

Evolution and Transformation of Inclusions in Calcium-Treated Low-Carbon Si–Mn-Killed Steel

Effect of Cerium on Inclusion Evolution and Pitting Corrosion of Nb-Microalloyed Steel.

Effects of Calcium Addition on Nonmetallic Inclusions in High‐Al Steel

THE CLASSIFICATION OF SILICOCALCIUM-BARIUM ALLOYS AND THEIR APPLICATION TO STEEL LADLE PROCESSING

Effect of Deoxidizing and Alloying Routes on the Evolution of Non-Metallic Inclusions in 55SiCr Spring Steel

Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel

Effect of Rare Earth–Magnesium Alloy on Inclusion Evolution in Industrial Production of Die Steel

Research of Si-Ca-Ba Compound Deoxidizer Composition Optimization for Steelmaking

Effect of cerium addition on non-metallic inclusions in a high-carbon chromium bearing steel

Effect of FeSi Alloy Additions and Calcium Treatment on Non-Metallic Inclusions in 304 Stainless Steel during AOD and LF Refining Process

Effect of Refining Slag Composition on Inclusions in Molten Steel treated by Barium‐bearing Alloy

Effect of calcium treatment on evolution of inclusions in low-carbon aluminum-killed steel

Effects of calcium treatment on non-metallic inclusions and magnetic properties of non-oriented silicon steel sheets

Inclusions modification by rare earth in steel and the resulting properties: A review

Thermodynamic Simulations and Industrial Trials Applied to Inclusion Control of SAE 9254 Si-Mn Killed Steel

The Effect of Aluminum Addition on the Evolution of Inclusions in an Aluminum-Killed Calcium-Treated Steel

Effects of Collision Behavior on Ai2O3 Based Inclusion Modification After Calcium Treatment for Aluminium-Killed Steel

Effects of collision behavior on Al2O3 based inclusion modification after calcium treatment for aluminium-killed steel