Abstract:Interface bonding strength plays a crucial role in enhancing the mechanical performance of beryllium/aluminum composites. In this study, the effects of Cu, Si and Mg doping on the interfacial properties of Be/Al composites were studied from the aspects of interfacial adhesion work and interfacial electronic structure through first-principles calculations based on density functional theory (DFT), and the Be/Al and Be/Al-5Cu-1.5Mg-0.2Si composites were prepared to verify the segregation behavior of doping elements at the interface and the effects of alloying elements addition on the interface bonding strength and mechanical properties. The first-principles calculation results reveal that the doping of Cu increases the interfacial adhesion work and strengthens the bonding between Be and Al atoms at the Be/Al interface, which leads to an enhancement of the bonding strength in the Al/Be interface. Si is found to have a beneficial effect on the interface bonding, albeit with a relatively minor influence. Conversely, the doping of Mg decreases the adhesion work of the Be/Al interface, as Mg forms anti-bonding with Be, thus being detrimental to the interface bonding. Energy spectrum analysis conducted on the near-interface region of the Be/Al-5Cu-1.5Mg-0.2Si composite reveals that Cu exhibits significant segregation at the Be/Al interface, Si exhibits a minor degree of segregation at the interface, while Mg does not show any significant segregation at the interface and is mainly distributed in Al matrix. Moreover, from the experimental comparison of interface bonding strength and mechanical performance between the two composites, it is evident that the addition of alloying elements (Cu, Mg, Si) effectively enhances the interface bonding and significantly improves the strength and ductility of the beryllium/aluminum composite. Combined the calculation and experimental results, it can be concluded that the enhancement of the bonding strength at the beryllium/aluminum interface is primarily driven by the addition of Cu, with a minor contribution from Si. Meanwhile, Mg strengthens the beryllium/aluminum composite mainly by strengthening the aluminum phase. This study provides an effective approach for enhancing the mechanical performance of beryllium/aluminum composites by regulating the interface bonding strength through matrix alloying.

Improvement of the Bonding Strength of A2/Cu Interface by Co, Ni, P and B Addition in Planar Flow Casting Process Based on First-principle Calculations

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

Potential Mechanisms of Interstitial Atomic Enhancement and Interface Failure Behavior in Ni 3 Co/Cu Systems

Effects of Cu, Si and Mg additions on the interfacial properties and mechanical properties of Be/Al composites: First-principles calculations and experimental studies

The Strengthening Effects and Mechanisms of Alloying Elements on Interfaces for Multiphase Ni-based Superalloys: A First-Principles Study

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Improving the Interface Strength and Fatigue Property of W-Cu-steel Brazed Joint Via Induced Interface Alloying

First-principles study of effects of alloying elements on Cu/γ-Fe interfacial properties

Improving Al Wettability on B 4 C by Transition Metal Doping: a Combined DFT and Experiment Study

First-principles study on the high-strength and high-conductivity modification mechanism of C7035 copper alloy by Ni, Si, and Co solid solution

Interface structure characterization and elements doping on interface bonding strength and tensile failure mechanism of NiCo coating/Cu matrix

Interface Bonding Properties of CrAlSiN-Coated Cemented Carbides Doped with CeO2 and Y2O3 Rare Earth Oxides

Enhancing Wettability of Cu3P/Cu Systems through Doping with Si, Sn, and Zr Elements: Insights from First Principles Analysis

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Co/(Ag-41.0at.%Sb)(1-X)Co-X And Ni/(Ag-41.0at.%Sb)(1-X)Ni-X Interfacial Reactions

Enhanced bonding strength of Al/Fe bimetal by Ni-based alloys Ni-based interlayer prepared by laser cladding technique

Effects of N doping on mechanical properties of Fe and interlayer adhesion of Fe with Cr, Ti, and Si: A spin-polarized density functional theory study

Strengthening mechanism of Si, V and Ti atoms to the Ag/AlN interface: a study from first-principles calculations

The first-principles study of interfacial bonding strength and segregation behavior of alloyed elements at the η(MgZn 2 )/Al interface

Interface alloying design to improve the stability and cohesion of W/HfC interface by first-principles study

The Effect of the Cu Interlayer on the Interfacial Microstructure and Mechanical Properties of Al/Fe Bimetal by Compound Casting