Abstract:Corrosion defect on pipelines shows a time-dependent growth in service environments. Prediction of corrosion defect growth and failure pressure of corroded pipelines as a function of time has remained a big challenge to industry. In this work, a finite element (FE)-based model was developed to quantify 3-dimensional (3-D) growth of a corrosion defect on an X100 steel pipe and predict the failure pressure as a function of time by considering a mechano-electrochemical (M-E) interaction. Parametric effects, including internal pressure, axial tensile stress and initial defect length, were investigated. Distributions of von Mises stress and anodic current density (i.e., corrosion rate) at the corrosion defect were determined. Results demonstrated that the growth rate of the corrosion defect followed the order of defect depth > defect length > defect width. With increased stresses resulted from internal pressure and axial tensile loading, the maximum defect depth and defect length increased apparently, but the defect width changed slightly. For example, the defect length increased by 11% and 16% after 10 years of service at internal pressures of 18 MPa and 26 MPa, respectively, and the defect depth increased by 27% and 34% correspondingly. However, the corrosion width increase maintained at about 22% when the internal pressure increased from 18 MPa to 26 MPa. As the corrosion defect grew with time, the failure pressure of the pipeline decreased. It is expected that, upon further validation by substantial data from field and the laboratory, the developed model could contribute to improved pipeline integrity management.

Prediction of burst pressure of corroded thin-walled pipeline elbows subjected to internal pressure

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Development of an empirical model to predict the burst pressure of corroded elbows of pipelines by finite element modelling

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Failure pressure analysis of corroded moderate-to-high strength pipelines

Burst Pressure Prediction of Pipes With Internal Corrosion Defects

Analytical prediction of failure pressure for pipeline with long corrosion defect

Research on a model-based burst pressure prediction method for pipelines with corrosion defects

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Comparative studies for failure pressure prediction of corroded pipelines

Finite Element Models for the Prediction of the Failure Pressure of Pipelines With Long Corrosion Defects

Assessment by finite element modelling of the mechano-electrochemical interaction at corrosion defect on elbows of oil/gas pipelines

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

The Failure Window Method and Its Application in Pipeline Burst

Finite element modeling of corrosion defect growth and failure pressure prediction of pipelines