Abstract:This paper presents an experimentally validated control-oriented model and an observer for diesel oxidation catalyst (DOC)-diesel particulate filter (DPF) system in the context of exhaust gas NO and NO2 concentration estimations. NO and NO2 have different reaction characteristics within DPF and selective catalytic reduction (SCR) systems, two most promising diesel engine aftertreatment systems. Although the majority of diesel engine-out NOx emissions is NO, the commonly used DOC located upstream of a DPF and a SCR can convert a considerable amount of NO to NO2. Knowledge of the NO/NO2 ratio in exhaust gas is thus meaningful for the control and diagnosis of DPF and SCR systems. Existing onboard NOx sensors cannot differentiate NO and NO2, and such a sensory deficiency makes separate considerations of NO and NO2 in SCR control design challenging. To tackle this problem, a control-oriented dynamic model, which can capture the main NO and NO2 dynamics from engine-out, through DOC, and to DPF, was developed. Due to the computational limitation concerns, DOC and DPF are assumed to be standard continuously stirred tank reactors in order to obtain a 0D ordinary differential equation model. Based on the model, an observer, with the measurement from a commercially available NOx sensor, was designed to estimate the NO and NO2 concentrations in the exhaust gas along the aftertreatment systems. The stability of the observer was shown through a Lyapunov analysis assisted by insight into the system characteristics. The control-oriented model and the observer were validated with engine experimental data and the measured NO/NO2 concentrations by a Horiba gas analyzer. Experimental results show that the model can accurately predict the main engine-out/DOC/DPF NO/NO2 dynamics very well in semisteady-state tests. For the proposed observer, the predictions converge to the model values and estimate the NO and NO2 concentrations in the aftertreatment system well.

Engine mass airflow sensor fault detection via an adaptive oxygen fraction observer

Random Forest Machine Learning Model for Predicting Combustion Feedback Information of a Natural Gas Spark Ignition Engine

Robust Nonlinear Disturbance Observer Design for Estimation of Ammonia Storage Ratio in Selective Catalytic Reduction Systems

NO and NO2 Concentration Modeling and Observer-Based Estimation Across a Diesel Engine Aftertreatment System

Nonlinear observer-based exhaust manifold pressure estimation and fault detection for gasoline engines with exhaust gas recirculation

Air-Fuel Ratio Control for Gasoline Engines Based on Physical Model Assisted Extended State Predictive Observer

Robust In-Flight Sensor Fault Diagnostics for Aircraft Engine Based on Sliding Mode Observers

Design of extended Kalman filter observer coupled to ammonia cross-sensitivity model for an SCR system

Input Observer-Based Individual Cylinder Air-Fuel Ratio Control: Modelling, Design and Validation.

Pressure Sensor Fault Diagnosis by Using Adaptive Robust Observers

Control-Oriented Modeling and Observer-Based Estimation of Solid and Gas Temperatures for a Diesel Engine Aftertreatment System

A Precise Estimation of Intake Port Air Mass Flow in SI Engines Based on State-Observer

Model Prediction Control of Fuel-Air Ratio for Lean-Burn Spark Ignition Gasoline Engine

Design of cascaded observer of internal oxygen mass for Proton Exchange Membrane Fuel Cell system

Simultaneous estimation of ammonia injection rate and state of diesel urea-SCR system based on high gain observer

Numerical Investigation of the Fuel/Air Ratio Sensor Sensitivity in a Port-Fuel-Injected Spark-Ignition Engine Equipped with Three-Way Catalysts

Design of Active Fault-Tolerant Control System for Air-Fuel Ratio control of Internal Combustion engine using nonlinear regression-based observer model

In-cylinder air mass flow estimation of gasoline engines based on map self-learning

ADRC with Adaptive Extended State Observer and Its Application to Air–Fuel Ratio Control in Gasoline Engines

A semi-empirical model for online real-time control of NOX generation in diesel engines

Sensor Soft Failure Diagnostics Based on Aero-Engine On-Board Adaptive Model