Abstract:α-Fe3O3-supported molybdenum catalysts were prepared by heating a mixture of MoO3and α-Fe2O3. XRD, XPS, LRS, FT–IR, and Mössbauer spectroscopy were used to study the interactions between MoO3and α-Fe2O3. At the temperature of 693 K, the dispersion capacity of MoO3on α-Fe2O3determined by XRD and XPS is 0.80 mmol MoO3/100 m2α-Fe2O3, i.e., 4.8 Mo6+/nm2. LRS and FT–IR results show that at low MoO3loading (1.8 Mo6+/nm2), Mo6+cations are located in the tetrahedral sites of the α-Fe2O3surface. The occcupation of octahedral surface vacant sites increases with the MoO3loading. Considering the fact that each Mo6+is accompanied by 3O2−anions and that α-Fe2O3has a hexagonal structure, almost all the incorporated Mo6+on the surface are in octahedral coordination environment. Based on the assumptions that the (001) plane of α-Fe2O3is preferentially exposed on the surface and that all the usable surface vacant sites have been occupied, the formation of a close-packed layer on the α-Fe2O3surface by the O2−anions linked with the incorporated Mo6+can be expected, which is in good agreement with the result predicted by the incorporation model proposed previously. A relationship between the residual bulk MoO3and the calcination time shows that Mo6+ions occupy the surface vacant sites of α-Fe2O3in two stages. The first stage may correspond to the migration of Mo6+cations from the bulk MoO3to the tetrahedral surface vacant sites on the surface. The second stage may correspond to the migration of Mo6+from the bulk MoO3into the octahedral unoccupied vacant sites. Mössbauer spectroscopy and XRD results indicate that a new phase, Fe2(MoO4)3, is formed when the sample containing 10.0 Mo6+/nm2α-Fe2O3was calcined at 743 K, suggesting that the calcination temperature is important to the interaction extent between MoO3and α-Fe2O3.

Mechanism and kinetics of decomposition reaction of ultrafine ammonium molybdate for preparing ultrafine MoO 3 powder

Preparation of MoO 3 powder by hydrothermal method

Preparation of nanoporous flake molybdenum powder by sol-gel reduction method

Elucidating the Reaction Pathway in the Ammonolysis of MoO3 Via in Situ Powder X-ray Diffraction and Transmission Electron Microscopy

Preparation of Ultrafine Β-Moo3 from Industrial Grade MoO3 Powder by the Method of Sublimation

A novel method for preparing ultrafine molybdenum powder

Preparation of Nanocrystalline Co3O4 and Its Catalytic Performance for Thermal Decomposition of Ammonium Perchlorate

Thermal Decomposition Mechanism of Ammonium Sulfate Catalyzed by Ferric Oxide

Enhanced Thermal Decomposition Properties and Catalytic Mechanism of Ammonium Perchlorate over CuO/MoS2 Composite

CuO/PbO Nanocomposite: Preparation and Catalysis for Ammonium Perchlorate Thermal Decomposition

The Self-Reduction during the Thermal Decomposition of an Ammonium Molybdate

Ultrafine Molybdenum Nitride Powder Prepared by High-energy Mechanochemistry Method

Facile Preparation of Cr 2 O 3 Nanoparticles and Their Use As an Active Catalyst on the Thermal Decomposition of Ammonium Perchlorate

Ultramicro Molybdenum Nitride Powder Prepared Using High-Energy Mechanochemical Method

Study of the Interactions Between MoO3and Α-Fe2o3

Effect of Superfine Composite Transition Metal Oxide on Thermal Decomposition of Ammonium Perchlorate

Adsorption and Decomposition of Mo(CO)6 on Thin Al2O3 Films: Fabrication of Metallic Molybdenum Model Catalyst

Preparation with High-Energy Mechanochemistry Method of Ultramicro Molybdenum Mitride Powders and Mechanism Research

ChemInform Abstract: Understanding Co‐Mo Catalyzed Ammonia Decomposition: Influence of Calcination Atmosphere and Identification of Active Phase.

Preparation of Nanometer NiO/MgO and Its Catalytic Performance for Thermal Decomposition of Ammonium Perchlorate

A Study on the Preparation of V2O5 from NH4V3O8 Based on Thermal Decomposition Including the Thermal Decomposition Temperature Effect, Mechanism and Kinetics