Abstract:A virtual prototype of the moving beam balancing system of a heavy-duty hydraulic press working under die forging function is built with Adams, AMESim and Simulink, and the balancing control process is analyzed using this prototype. The moving beam of the heavy-duty hydraulic press may tilt due to the eccentric load during the die forging processing, and thus affect the forging quality and the safety of the press. So it is necessary to research the beam balancing control process. Compared to the traditional methods based on simplified mathematical models, virtual prototype technology can obtain a co-simulation model, avoid tedious formula derivation and solving work, and save test time and cost. Based on the analysis of the working principle of balancing system, this paper establishes a dynamical model of the moving beam, a hydraulic circuit model of the single balancing system and a controller model using Adams, AMESim and Simulink, respectively. Then a virtual prototype is built using the three models via co-simulation interface files. The eccentric load signal is constructed in AMESim according to the variation of eccentric load during die forging process. By adjusting the controller parameters, the rapid balancing of the moving beam under eccentric load conditions is realized, and high precision of dynamic balancing and steady equilibrium is obtained. The simulation results show that the single balancing unit can achieve effective balancing of the moving beam, and the co-simulation analysis method based on the virtual prototype built with Adams, AMESim and Simulink is feasible in the research of the synchronous rectification of the moving beam. This work is a useful exploration in the research of synchronous rectification of moving beams.

Research on saving energy of beam-pumping unit

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

An Analysis of Energy-saving and Simulation on Variable Torque Balance of Beam Pumping Unit

Antivibration and Energy Efficiency Design for Large Stroke Additive Manufacturing Based on Dynamic Trajectory Adaption

Kinematic and Dynamic Analysis of Eccentric Balanced Positive Torque Pumping Unit

Kinematic and Dynamic Simulation Analysis of Modified Conventional Beam Pumping Unit

The Kinematic Analysis and Parametric Design of Beam Pumping Unit Based on ADAMS

Summary on the Energy-saving Technical transformation of Beam Pumping Unit(II)

Study of Automatic Dynamic Balancing System for Engine Crankshaft

Energy-saving principle and contrastive analysis of performance of energy-saving beam-pumping unit

Energy-saving mechanism research on beam-pumping unit driven by hydraulics

Energy-Saving Method and Dynamic Reactive Power Compensation for Beam Pumping Unit

Collaborative Simulation of Compound Dynamic Balancing Device for High-Speed Rotor System

Summary on the Energy-saving Technical Transformation of Beam Pumping Unit(I)

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Positive Torque Modulation Method and Key Technology of Conventional Beam Pumping Unit

A DVA-Beam Element for Dynamic Simulation of DVA-Beam System: Modeling, Validation and Application

CO-SIMULATION RESEARCH OF THE BALANCING CONTROL OF THE MOVING BEAM OF A HEAVY HYDRAULIC PRESS DURING THE DIE FORGING PROCESS

Practical Model for Energy Consumption Analysis of Beam Pumping Motor Systems and Its Energy-Saving Applications

An Energy Saving System for a Beam Pumping Unit

A numerical method for analysis on walk-beam pumping units