Abstract:Additive manufacturing, particularly Wire Arc Additive Manufacturing (WAAM), provides numerous advantages for the production of near net shape components, since it combines a high productivity with a reduced material waste. It is of major interest when working with expensive materials such as titanium alloy Ti-6Al-4V, commonly used in aerospace. Due to high temperature gradients WAAM is very susceptible to high residual stresses and hence, distortion problems. In order to avoid extensive experimental parameter studies in the design phase to mitigate these issues, a process design based on numerical simulation is favourable. However, accurate estimations up to now necessitate the implementation of transient multi-physics models, which may not be effective when applied to large structures because of their associated large computational time. Consequently, there is a clear need for faster numerical models, especially when path planning optimization is targeted. A promising very fast approach to solve this problem is the so-called inherent strain formulation. However, the original inherent strain formulation is hard to implement in certain commercial finite element (FE) software packages, since strain data is harder to access than stress data. In addition, the original approach requires the modification of the FE solver itself, and hence needs to be adapted for each FE analysis software package individually, which is not only inefficient but might lead also to different results. To overcome these issues a more universally applicable and non-intrusive incremental Inherent Stress formulation that can be incorporated to any commercial finite element solver has been developed within this work. Within the modelling approach the additive manufacturing of a representative component is simulated bead by bead, with the addition of each new bead corresponding to a linear elastic problem that can be rapidly solved. Furthermore, the model incorporates the temperature dependency of the Young's modulus during heating and cooling cycles to better account for thermo-mechanical coupling. Evolution of inherent stress during the deposition of successive layers is also introduced to increase the fidelity of the model. The validity of the model was assessed using two stiffened representative geometries with different complexity. In both cases, a major reduction in computational up to 98 % is observed, with a corresponding displacement error of 20 % in the worst-case scenario, thus constituting an interesting tool to evaluate distortion trends.

An experimental and modeling study on warping in additively manufactured overhang structures

Design and Validation of 3D Self-Supporting Structures and Printing Paths for Multi-Axis Additive Manufacturing

Numerical and experimental investigation of the geometry dependent layer-wise evolution of temperature during laser powder bed fusion of Ti–6Al–4V

Layout and Geometry Optimization Design for 3D Printing of Self-Supporting Structures

A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation

The Effects of Overhang Forming Direction on Thermal Behaviors during Additive Manufacturing Ti-6Al-4V Alloy

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

Effect Of Scanning Routes On The Stress And Deformation Of Overhang Structures Fabricated By Slm

Thermo-mechanical modeling of lattice-core sandwich panels in powder bed fusion

A Framework for Simulating the Path-level Residual Stress in the Laser Powder Bed Fusion Process

Finite Element Analysis of Warping and Mechanical Properties of 3D Parts Printed by Fused Deposition Modeling

Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems

Tensile behavior of AlSi10Mg overhanging structures fabricated by laser powder bed fusion: Effects of support structures and build orientation

Overlap ratio and scanning strategy effects on laser powder bed fusion Ti6Al4V: numerical thermal modeling and experiments

The effect of contactless support parameters on the mechanical properties of laser powder bed fusion produced overhang parts

Incremental inherent stress model for the fast prediction of part distortion made via wire arc additive manufacturing

Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition

Warping Analysis in Laminated Object Manufacturing Process

Simulation of temperature field and deformation in laser-arc hybrid additive manufacturing

Effect of scanning tracks on the contour morphology and dimensional accuracy of the fine structure manufactured by laser powder bed fusion

One-Dimensional Thermomechanical Model for Additive Manufacturing Using Laser-Based Powder Bed Fusion