Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

Enhanced thermal stability of lead-free (1-x)Ba(Zr0.2Ti0.8)O3-x(Ba0.7Ca0.3)TiO3 ferroelectric ceramics

Enhanced Thermal Stability of Piezoelectricity in Lead-Free (ba,ca)(ti,zr)o3 Systems Through Tailoring Phase Transition Behavior

Decreasing sintering temperature for BCZT lead-free ceramics prepared via hydrothermal route

Electrical properties of 0.94Bi0.5Na0.5TiO3–0.06Ba(Zr0.055Ti0.945)O3 lead-free ceramics with high thermal stability

Enhancement of the temperature stabilities in yttrium doped (Ba 0.99Ca 0.01)(Ti 0.98Zr 0.02)O 3 ceramics

Composition Designing and Sintering Behavior Tailoring in [(ba1−xcax)0.995eu0.005](ti1−yhfy)o3 Multifunctional Piezoceramics

Enhanced Temperature Stability in Tb-doped (ba0.99ca0.01)(ti0.98zr0.02)o3 Lead Free Ceramics

Tetragonal (ba, Ca) (zr, Ti)O3 Textured Ceramics with Enhanced Piezoelectric Response and Superior Temperature Stability

Electrical properties of 0.94Bi 0.5 Na 0.5 TiO 3 –0.06Ba(Zr 0.055 Ti 0.945 )O 3 lead-free ceramics with high thermal stability

Achieving Excellent Electrocaloric Properties Near Room Temperature in Ba0.75sr0.25tio3 Based Pb-Free Ceramics by Phase Modification

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Enhanced Ferroelectric Properties in (ba1−xcax)(ti0.94sn0.06)o3 Lead-Free Ceramics

Phase/domain Structure and Enhanced Thermal Stable Ferro-/Pyroelectric Properties of (1-X)0.94na0.48 Bi0.44TiO3-0.06BaTiO3:xZnO Ceramics

Phase Coexistence and Evolution in Sol-Gel Derived BY-PT-PZ Ceramics with Significantly Enhanced Piezoelectricity and High Temperature Stability

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Temperature Stability in Dy-Doped (Ba0.99ca0.01)(ti0.98zr0.02)o-3 Lead-Free Ceramics with High Piezoelectric Coefficient

Electrical properties of 0.94Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>–0.06Ba(Zr<Subscript>0.055</Subscript>Ti<Subscript>0.945</Subscript>)O<Subscript>3</Subscript> lead-free ceramics with high thermal stability

Enhanced energy-storage properties and dielectric temperature stability of (Bi0·5Na0.5)0.84Sr0·16Ti1-(Y0·5Nb0.5) O3 lead-free ceramics

Evolution of Phase Transformation Behavior and Dielectric Temperature Stability of BaTiO3–Bi(Zn0.5Zr0.5)O3 Ceramics System

Microstructure and Piezoelectric Properties of Ba ( Ti0.8 Zr0.2)O3-(Ba0.7Ca0.3)TiO3 Lead-free Ceramics

Enhanced Electromechanical Properties of SrTiO3-BiFeO3-BaTiO3 Ceramics Via Relaxor Behavior and Phase Boundary Design