Highly efficient recovery of bromine from shale gas wastewater by selective electrochemical oxidation

Xin-Lin Zhou,Zhi-Yong Ji,Jing Wang,Xiao Zhang,Xiao-Fu Guo,Jie Liu,Pan-Pan Zhang,Jing-Tao Bi,Ying-Ying Zhao,Jun-Sheng Yuan
DOI: https://doi.org/10.1016/j.jece.2022.107946
IF: 7.7
2022-06-08
Journal of Environmental Chemical Engineering
Abstract:The recovery of bromine from shale gas wastewater (SGW) by selective electrochemical oxidation is a sustainable way to treat SGW and alleviate the shortage of bromine resources. However, this method suffers from the defect of low extraction efficiency at present. Considering the electrode area is one dominant factor affecting selective bromine extraction performance, the area of the anode was first investigated, and then 1.5 × 6 cm 2 was selected as the optimal size for 300 mL wastewater in the Φ6 × 14 cm 3 bottle. Through the study on the effect of organics, it was found that methanol (MeOH) had little impact on the electro-oxidation of bromine, while polyacrylamide (PAM) had a serious inhibition on bromine extraction. The adhesion of organics on the electrode surface and the consumption of bromine for the degradation of the organic result in a serious inhibition of bromine extraction. To improve the selective oxidation of bromine yield in real SGW, an advanced oxidation method based on persulfate was used to degrade the organics in SGW, and the yield increased from 25.4% to 77.8% after pretreatment. During this process, the theoretical hydrogen production is 1.01 mmol/L at the cathode in 6 h. The final effluent mixed anode and cathode chambers were neutral, which is environmental friendliness. These results could push the development of shale gas wastewater treatment.
engineering, chemical, environmental
What problem does this paper attempt to address?