Treatment of Simulated Brominated Butyl Rubber Wastewater Using Monovalent Anion Perm-Selective Membranes Through Selective Electrodialysis

Jin Yang,Noor Ul Afsar,Qian Chen,Rongqiang Fu,Zhaoming Liu,Liang Ge,Tongwen Xu

DOI: https://doi.org/10.1016/j.seppur.2024.127293

IF: 8.6

2024-01-01

Separation and Purification Technology

Abstract:Selective electrodialysis (SED) technology utilizing monovalent anion perm-selective membranes (MAPMs) has potential in resource recovery and wastewater treatment. However, the development and production of homogeneous MAPMs with high performance and scalability pose significant challenges. This study successfully scaling up a poly(alkyl-biphenyl pyridinium)-based MAPM suitable for large-scale SED applications and applies it to the treatment of mono-/di-valent anion wastewater. The pilot-scale membrane exhibits significantly higher perm-selectivity for various mixed anion systems compared to the commercial ACS membrane, and under the conditions of a current density of 40 mA cm - 2 , an initial dilute chamber solution of 3 L 0.5 mol/L NaCl, and a constant concentration chamber volume of 0.2 L, the pilot-scale membrane achieves a salt (NaCl) concentration of 18.6 wt% in just 70 mins in the membrane stack, with an energy consumption of 0.38 kWh kg -1 . Furthermore, simulated brominated butyl rubber wastewater is treated with the aim of refining NaBr and separating SO 4 2- ions. Several factors, such as applied voltage, initial concentration of the dilute chamber solution, feed flow rate, and dilute-to-concentrated chamber volume ratio are investigated to assess their effects on the treatment results. By continuously optimizing the operating conditions, a NaBr product with a concentration ratio of 6.2 and a purity of 97.8 % was obtained, with the Br - ion flux of 3.24 mol m -2 h -1 and an energy consumption of 0.319 kWh kg - 1 .