Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Estimating shear strength of high-level pillars supported with cemented backfilling using the Hoek–Brown strength criterion

Rational size and stability analysis of horizontal isolated pillars in deep mining from caving to filling method

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Design Method of Protective Pillars in Pit Shafts in Residual Pillar Recovery of Industrial Square of Backfill Mining

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

3D Modelling approach to identify parametric configurations for pillar stability in underground metal mine: a case study

Determining the minimum thickness of a crown pillar and optimizing the cross-sectional size of point pillars for the safe exploitation of a subsea gold mine

Slope stability calculation method for highwall mining with open-cut mines

Stability analysis of underground mine hard rock pillars via combination of finite difference methods, neural networks, and Monte Carlo simulation techniques

Stability analysis of rib pillars in highwall mining under dynamic and static loads in open-pit coal mine

Field and Numerical Investigations on Pumpable Standing Supports Failure Analysis in the Longwall Pre-driven Recovery Room

Study of the Critical Safe Height of Goaf in Underground Metal Mines

Study on web pillar failure mechanism during auger mining and its associated risk assessment

Mechanical Analysis of the Failure Characteristics of Stope Floor Induced by Mining and Confined Aquifer

Investigation and Stability Assessment of Three Sill Pillar Recovery Schemes in a Hard Rock Mine

Analysis on safe thickness of the horizontal separation pillar in the upward horizontal slicing and filling method

Subsidence prediction method of solid backfilling mining with different filling ratios under thick unconsolidated layers

Comparison between Plastic Radius around a Circular Opening Derived from Hoek-Brown Failure Criterion and Calculated through Modified Fenner Formula

A Solution to Estimate the Total and Effective Stresses in Backfilled Stopes with an Impervious Base During the Filling Operation of Cohesionless Backfill

Evaluation of the Rock Mass Strength for Hard Rock Pillar Design Using Bonded Block Models

The Reissner–Ritz Method for Solving the Deflection Function of the Crown Pillar in the Stope and Its Application in the Crown Pillar Failure Analysis