Abstract:This paper presents a study on the stability of a mine entry of an innovative approach to non-pillar coal mining—gob-side entry retaining using cantilever beam theory (GERMC). This method is on the rise in China and it has shown to increase the coal seam rate of recycling and mining productivity. The method utilizes the caved-in material resulting from the mining activities to fill the gob area and ensure the stability of the roof of the already mined area. The caved-in material will form the gob-side wall of the retained entry. This characteristic is unique to this method. Thus, there are not many studies that analyze the stability of the filling material and of the gob-side entry wall under these circumstances, which is a vital element for the safety of the mining operations. This paper studies the stability of the gob-side retained entry of the Hongjingta underground coal mine in China. The authors perform the analysis using a discrete fracture network (DFN) model developed by the Massachusetts Institute of Technology (MIT), GEOFRAC, in combination with the discrete-element method (DEM) software UDEC. GEOFRAC estimates the rock blocks (fracture networks) in the filling body, from fracture traces measured along the gob-side wall of the entry. Statistical methods are used to estimate the fracture intensity and the mean fracture areas, which are inputs to the DFN. The generated fracture networks are then inputted into the DEM code, UDEC, to evaluate the stability of the mine-retained entry. For this study, we developed two types of models in UDEC, one considering the fractures generated by the DFN model and another considering the gob-filling material as a continuum. This methodology—combined DFN–DEM—is unique and provides a more realistic representation of the gob-filling material by considering the fractures in the filling body and by estimating those fractures (interfaces between rock blocks) using field data. In addition to this, we also considered the effects of uncertainties that are associated with estimating three-dimensional (3-D) fractures' networks/rock blocks from two-dimensional (2-D) field data. Finally, the results of the simulations were compared with the measurements from the mine and are in good agreement.

Investigation and Stability Assessment of Three Sill Pillar Recovery Schemes in a Hard Rock Mine

3D Modelling approach to identify parametric configurations for pillar stability in underground metal mine: a case study

Stability analysis of underground mine hard rock pillars via combination of finite difference methods, neural networks, and Monte Carlo simulation techniques

Analysis on Stability of Top Pillar When Coming into Underground Mining from Open-Pit

Rational size and stability analysis of horizontal isolated pillars in deep mining from caving to filling method

Stability Analysis of Surrounding Rock in Paste Backfill Recovery of Residual Room Pillars

Study on web pillar failure mechanism during auger mining and its associated risk assessment

Stability Analysis of Pillars in Underground Limestone Mine Using Three-Dimensional Scanning Techniques

Instantaneous and long-term deformation characteristics of deep room-pillar system induced by pillar recovery

Three Dimensional Finite Element Analysis of Parameters of Boundary Crown Pillar in Transition from Open-pit to Underground Mining

Coal pillar failure analysis and instability evaluation methods: A short review and prospect

Numerical and theoretical analysis of multi-pillar instability under elastic beams

Evaluation of the Rock Mass Strength for Hard Rock Pillar Design Using Bonded Block Models

Stability Evaluation of Multi-pillar and Roof System Based on Instability Theory

Study on Optimization of Stope Structural Parameters and Filling Scheme of Wawu Phosphate Mine in Yichang City, China

Instability mechanism and stability control of gob-side entry in a deep mine: a case study

Stability Analysis of a Non-pillar-Mining Approach Using a Combination of Discrete Fracture Network and Discrete-Element Method Modeling

Numerical Study of Failure Mechanisms and Control Techniques for a Gob-Side Yield Pillar in the Sijiazhuang Coal Mine, China

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam

Slope stability calculation method for highwall mining with open-cut mines

Predicting Hard Rock Pillar Stability Using GBDT, XGBoost, and LightGBM Algorithms