Abstract:Surface subsidence induced by underground mining is one of the challenging problems in mining engineering, which can destroy ground surface buildings and cause huge economic losses to the mine. In this study, a two-dimensional numerical model, established by the discrete element method code PFC2D, was adopted to investigate the mechanical mechanism of surface subsidence and backfill material movement induced by underground mining in the Hongling lead-zinc mine. In the first simulation case, the ore body was excavated from the ground surface to the mining level 705 m by the sublevel caving mining method, and the stress evolution during the mining process was analyzed to reveal the mechanical mechanism of surface subsidence. In the second and third simulation cases, the mined-out areas above 905 m were backfilled by the noncemented tailings and an insulating pillar was reserved beneath the backfill material, and then the deep ore body was excavated by two different mining methods to study the movement law of the backfill material and rock strata induced by underground mining. The numerical simulation results show that when the sublevel caving mining method is adopted, underground mining can induce toppling failures in the hanging wall and lead to a large collapse pit in the ground surface. After the toppling failures in the hanging wall, the collapsed waste rock in the mined-out area can provide support force for the surrounding rock and restrict the further collapse of the hanging wall. Furthermore, when the cut-and-fill mining method is adopted for the excavation of deep ore body, the insulating pillar can restrict the horizontal displacement of surrounding rock and maintain the stability of the backfill material. The cut-and-fill mining method can efficiently control the surface subsidence and prevent the occurrence of collapse pit in the ground surface and is recommended for the Hongling lead-zinc mine to solve the surface subsidence problem.

Three Dimensional Finite Element Analysis of Parameters of Boundary Crown Pillar in Transition from Open-pit to Underground Mining

Analysis on Stability of Top Pillar When Coming into Underground Mining from Open-Pit

3D Modelling approach to identify parametric configurations for pillar stability in underground metal mine: a case study

Rational size and stability analysis of horizontal isolated pillars in deep mining from caving to filling method

Three-Dimensional Analytical Solution for Passive Limit Support Pressure During Shield Tunnelling

Numerical Simulation on the Structural Parameter Optimization of Ore Block for Non-pillar Continuous Mining

Stability analysis of open-pit gold mine slopes and optimization of mining scheme in Inner Mongolia, China

Structural Parameter Optimization for Large Spacing Sublevel Caving in Chengchao Iron Mine

Stability Of Boundary Pillar Of Open Pit And Underground Mine

Determining the minimum thickness of a crown pillar and optimizing the cross-sectional size of point pillars for the safe exploitation of a subsea gold mine

Study on surrounding rock disturbance effect of multi-middle section combined backfilling mining in inclined iron ore

Numerical stability assessment of a mining slope using the synthetic rock mass modeling approach and strength reduction technique

Experimental and numerical investigations on cross rock pillar method for super large cross-sectional tunnel excavation

In-situ Monitoring and 3D Numerical Analysis of Reinforced Face Behaviour of Tunnel in Composite Strata by Considering Randomly-Distributed Rigid Cobble Granules

Stability analysis of rock fracture and support performance in steeply dipping ore deposits with massive mining stopes

Study on Optimization of Stope Structural Parameters and Filling Scheme of Wawu Phosphate Mine in Yichang City, China

Numerical Simulation of Surface Subsidence and Backfill Material Movement Induced by Underground Mining

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Study on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of "Heteromorphic" Surrounding Rock

Investigation of Rock Mass Stability Around the Tunnels in an Underground Mine in USA Using Three-Dimensional Numerical Modeling

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam