Abstract:Compact and high-energy femtosecond fiber lasers operating around 900-950 nm are desirable for multiphoton microscopy. Here, we demonstrate a >40 nJ, sub-100 fs, wavelengthtunable ultrafast laser system based on chirped pulse amplification (CPA) in thulium-doped fiber and second-harmonic generation (SHG) technology. Through effective control of the nonlinear effect in the CPA process, we have obtained 92-fs pulses at 1903 nm with an average power of 0.89W and a pulse energy of 81 nJ. By frequency doubling, 95-fs pulses at 954 nm with an average power of 0.46 W and a pulse energy of 42 nJ have been generated. In addition, our system can also achieve tunable wavelength from 932 nm to 962 nm (frequency doubled from 1863 nm to 1919 nm). A pulse width of similar to 100 fs and sufficient pulse energy are ensured over the entire tuning range. Finally, we applied the laser in a two-photon microscope and obtained superior imaging results. Due to a relatively low repetition rate (similar to 10 MHz), similar imaging quality can be achieved at significantly reduced average power compared with a commercial 80MHz laser system. At the same time, the lower average power is helpful in limiting the thermal load to the samples. It is believed that such a setup, with its well-balanced optical characteristics and compact footprint, provides an ideal source for two-photon microscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

3 MW peak power femtosecond stretched pulse thulium-doped all-fiber laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

108 fs high-power mode locked double-clad ytterbium-doped fiber laser using FePS3 saturable absorber

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

2 Mu M Femtosecond Fiber Laser Source And Its Application For Mid-Ir Supercontinuum Generation

High peak-power 2.1-μm femtosecond Holmium amplifier at 100 kHz

Ultra-short Pulse Burst Laser Around 1.98 Μm Obtained Through an All-Fiber Nonlinear Wavelength Converter and Tm-doped Fiber Amplifier.

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

Watt-level 2.8 μm ultrashort pulse generation from an all-fiber Er:ZBLAN fiber amplifier

Optimal Design of High Energy Similariton Thulium-Doped Fiber Lasers

Generation of sub-150 fs, 10 W-class, pedestal-free 2.07 µm ultrashort pulses using a cascade compression system

Tm-Doped Nonlinear Fiber Amplifier Emitting 50 fs Pulses and 20 W of Average Power at 2 μm Wavelength

High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Watt-level 1.6 Μm Dissipative Soliton Ultrafast Laser and External Generation of ∼70 Fs Noise-Like Pulses for Supercontinuum Generation

All-polarization-maintaining Mode-Locked Thulium-Doped Femtosecond Laser at 1.7 Μm

10-µJ-level femtosecond pulse generation in the erbium CPA fiber source with microstructured hollow-core fiber assisted delivery and nonlinear frequency conversion

Generation of high-power 780 nm femtosecond pulses by an all-polarization-maintaining Er-doped fiber amplification system

Development of 10kW Peak-Power Pulsed Single-Mode Fiber Laser

72-fs Er-doped Mamyshev Oscillator