Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

Generation of sub-150 fs, 10 W-class, pedestal-free 2.07 µm ultrashort pulses using a cascade compression system

Generation of sub-150?fs, 10?W-class, pedestal-free 2.07?μm ultrashort pulses using a cascade compression system

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Watt-level 2.8 μm ultrashort pulse generation from an all-fiber Er:ZBLAN fiber amplifier

High power Raman soliton generation at 1.7 μm in all-fiber polarization-maintaining erbium-doped amplifier

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

Generation of Pedestal-Free 10 Ghz Pulses from A Comb-Like Dispersion Profiled Fiber Compressor and Its Application in Supercontinuum Generation

Single-step self-compression of ultrashort pulses below 20 fs by all-fiber supercontinuum generation

396 MHz CPA femtosecond laser system based on a single crystal fiber rod-type amplifier

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

PICOSECOND SOLITON COMPRESSION IN THE FIBERS WITH SLOWLY DECREASING DISPERSION

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

Generation of 5 GHz 16.2 ps ultrashort optical pulse

790–1000 nm continuously-tunable fiber-based femtosecond laser source

Compact all-fiber 2.1-2.7 μ m tunable Raman soliton source based on germania-core fiber

500-nm broadband light generation in highly nonlinear dispersion shifted fiber by soliton laser

High Energy and High Peak Power Nanosecond Pulses Generated by Fiber Amplifier

Generation of 4.8ps ultrashort semiconductor laser pulses by high-order optical soliton compression effect

Femtosecond Red and Near-Infrared Lasers Due to Cascaded-Raman-Assisted Four-Wave Mixing in a Nonlinear Yb-Doped Fiber Amplifier