Abstract:The concept of biomass CaO-sorbent based Chemical Looping Gasification (CLG) have gained increasing attention for its ability of reducing CO2 emission by in situ CO2 capture, allowing for the production of a CO2-rich stream for sequestration and a high-hydrogen-content product gas. The core unit of CLG system is comprised of an interconnected dual-circulating fluidised bed reactors: the gasifier and the combustor (regenerator). Biomass feedstock is given into the gasifier, in which steam is gasifying agent and fluidizing wind, CaO sorbent could absorb CO2 generated from biomass gasification through carbonation, which changes the chemical equilibrium and strongly stimulates H2 production. In combustor, the remain char from gasifier burns with air/O2, generates the necessary heat for the CaCO3 decomposition and sensible heat delivery through bed material circulation. In this research, parametric analyses on the dual-fluidized bed system were carried out based on ASPEN Plus simulation. Gibbs free energy minimization approach was used to build the reactors model, the PB-RM is chosen as the property method. Native pine sawdust was chosen as feedstock, at a feed rate of 10 t/hr. Mass and energy coupling of two reactors are calculated by setting the combustor temperature at 900°C constantly. The compositions of the product gases, hydrogen yield & hydrogen production efficiency (HPE), cold gas efficiency (CGE) and gasifier carbon conversion ratio were correlated to the gasification operating variables, such as gasifier temperature (T), pressure (P), minimum mole ratio of CaO to carbon ([Ca]/[C]), and mole ratio of steam to carbon ([H2O]/[C]). The appropriate temperature should consider two aspects: the thermodynamics and the chemical kinetics in gasifier. The model shows that higher temperature than 700°C may not fit for H2 production because of the dramatic decrease of H2 and increase of CO2 concentration in product gas, while the model also overlooked the backward chemical kinetics under lower temperatures than 700°C, which means 700°C maybe a favourable one. Pressure study demonstrate that higher pressure than atmosphere is obviously beneficial for H2 concentration, which increased from 84.5% to 93.9% when system pressure increased from 1 bar to 3 bar. 3 bar is likely the best value for the hydrogen production, at which the hydrogen yield and HPE was up to 43.7 mol·kg and 78.5%. Higher pressure than 3 bar is in favour of CGE and H2 concentration in product gas, but not observably. Thermodynamically there is a minimum value of [Ca]/[C], which is 0.296 in this biomass case under standard operating condition, to insure the absorption of CO2 in gasifier. But in reality, researchers must consider the sorbent maximum conversion, kinetics of CO2–sorbent reaction and sorbent capacity decay during cyclic carbonation–regeneration reaction, so that higher [Ca]/[C] than the minimum is needed, e. g. unity or larger. Optimal [H2O]/[C] can be discerned around 1.25, 76.14%

High-quality syngas production from biomass driven by chemical looping on a PY-GA coupled reactor

Chemical looping pyrolysis-gasification of biomass for high H2/CO syngas production

Co-production of upgraded bio-oils and H2-rich gas from microalgae via chemical looping pyrolysis

Hydrogen-rich syngas production with tar elimination via biomass chemical looping gasification (BCLG) using BaFe2O4/Al2O3 as oxygen carrier

New Process Combining Fe-Based Chemical Looping and Biomass Pyrolysis for Cogeneration of Hydrogen, Biochar, Bio-Oil and Electricity with In-Suit CO2 Separation

Thermodynamic analysis of syngas generation from biomass using chemical looping gasification method

Biomass chemical looping gasification for high-quality syngas: A critical review and technological outlooks

Syngas production by two-stage method of biomass catalytic pyrolysis and gasification

Highly efficient and durable syngas production over one-step synthesized synergistic oxygen carriers in biomass chemical looping gasification

Research of Characteristics Biomass Staged-Gasification for Hydrogen-Rich Syngas

Coupling biomass gasification and inline co-steam reforming: Synergistic effect on promotion of hydrogen production and tar removal

Assessment of low‐rank coal and biomass co‐pyrolysis system coupled with gasification

High value-added syngas production by supercritical water gasification of biomass: Optimal reactor design

Performance evaluation of carbon-negative syngas production via chemical looping reforming of methane from biomass pyrolysis volatiles

A novel system of biomass for the generation of inherently separated syngas by combining chemical looping CO2-gasification and steam reforming process

Review of Biomass Chemical Looping Gasification in China

Syngas, tar and char behavior in chemical looping gasification of sawdust pellet in fluidized bed

A study of co-pyrolysis of sewage sludge and rice husk for syngas production based on a cyclic catalytic integrated process system

Performance Evaluation of Torrefaction Coupled with a Chemical Looping Gasification Process under Autothermal Conditions: Flexible Syngas Production from Biomass

Simulation on Hydrogen Production from Biomass with Cao-Based Chemical Looping Gasification

High-purity syngas production by cascaded catalytic reforming of biomass pyrolysis vapors