Abstract:A coupled thermal–metallurgical model is developed to predict the temperature fields and spatial distribution of volume fraction of phases during laser beam welding of 1020, 1045, and 1060 steels. The classical transient heat conduction model is used to calculate the temperature fields during laser beam welding. For phase transformation, the austenization, the austenite-to-pearlite/ferrite transformation, the austenite-to-bainite transformation, and the austenite-to-martensite transformation are modeled respectively. All of these transformation models are solved by the finite element method (FEM) based on the simulated temperature fields. The thermal properties of the three steels are determined by the linear interpolation base of the phase fractions, and thermal properties for each pure phase. The temperature fields and spatial distribution of phases are predicted by 3D finite element method (FEM) code which is developed by the authors to solve the thermal–metallurgical models. In addition, comparison between the coupled model and the pure conduction model without considering phase transformations is carried out to study the influence of phase transformation on temperature fields during welding. According to the comparison, the temperature of the coupled model is higher than the pure conduction model in the temperature region above 1000 °C, but the temperature profiles are very similar at the temperature region under 1000 °C. The predicted volume fractions of 1020 and 1060 steels are close to experimental results. However, there is an obvious difference between predicted and experimental results of the phase fraction of 1045 steels.

Temperature Field Simulation of Laser Transmission Welding PA66 Based on Volumetric Heat Source

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Numerical Simulation for Temperature Field in Molten Pool of Deep Penetration Laser Welding of High Strength Steel

Numerical Simulation on Temperature Field in Laser-Plasma Arc Hybrid Welding

Numerical Simulation on Temperature Field of Laser Deep Penetration Welding of GH4133 Alloy

Temperature Field Simulation of Laser-Tig Hybrid Welding

Molten Depth Modeling of Laser Transmission Welding Based on Temperature Distribution of Moving Point Heat Source

Temperature Simulation of Aluminium Alloy Double-Arc Welding Process on Simplified Conditions

A Three-Dimensional Thermal Finite Element Model of Laser Transmission Welding for Lap-Joint

Modeling of Temperature Field and Pool Formation During Linear Laser Welding of DP1000 Steel

Three dimensional numerical simulation of welding temperature fields in stainless steel

A thermal–metallurgical model of laser beam welding simulation for carbon steels

Model Heat Source Using Actual Distribution of Laser Power Density for Simulation of Laser Processing

Numerical Simulation on Temperature Field of Dynamic Welding Processing with Weaving

Heat source models for numerical simulation of laser welding processes – a short review

Numerical Simulation of Temperature Field in Multilayer Heterogeneity Lamination Laser Soldering

Finite element simulation of laser transmission thermoplastic welding of circular contour using a moving heat source

A Physically Motivated Heat Source Model for Laser Beam Welding

Heat Source Model for 2D Welding Temperature Field Simulation Based on the Configuration of Welding Line

Numerical analysis on the temperature field in laser-plasma hybrid welding of an aluminum alloy

Numerical Simulation of Molten Pool Formation During Laser Transmission Welding Between PET and SUS304