Abstract:In polishing nickel-based superalloys, the surface quality and dimensional accuracy of the workpiece are closely related to the wear of the abrasive tools. Over the years, several researchers have studied the wear of grinding wheels or abrasive belts, including the effects of various machining methods, abrasive materials, and machining parameters on the wear of abrasive tools. However, there is not enough research on the wear mechanism of the abrasive cloth flap wheel (ACFW). In this paper, during polishing GH4169G with ACFW, the wear evolution mechanism of ACFW and its effect on the surface integrity of GH4169G were investigated. First, the variations in material removal and ACFW wear amounts during the polishing process were analysed, and the different wear stages were divided based on the polishing ratio. Second, the mic-morphology and surface element distribution of ACFW at different wear stages were investigated using SEM and, EDS, and the wear evolution mechanism of ACFW was analysed. Finally, the effects of ACFW wear on the surface morphology, surface oxidation and microstructure of GH4169G were investigated by SEM, EDS, XRD, and EBSD. The results showed that the primary wear forms of ACFW were stepped fracture, cleavage fracture, blunt, pull-out, and adhesion wear. During the initial wear stage, the proportion of each wear form was relatively balanced. In the medium wear stage, fracture wear was the main wear form. Blunt and adhesive wear were the primary forms of wear during the final wear stage. In addition, with ACFW wear, the surface roughness tend to decrease first and then increase, however, the refinement level of the grains, the intensity of plastic deformation and the intensity of the oxidation reaction gradually increased. This study provides effective guidance for developing more wear-resistant abrasive tools and optimising the grinding and polishing processes.

Influence of holding time on the interfacial solid solution and mechanical properties of agglomerated white fused alumina abrasives

Wear behavior of white alumina and seeded gel abrasive wheels in ultrasonic vibration-assisted grinding of nickel-based single-crystal alloy

On the Grinding Performance of Alumina Wheels in Ultrasonic Vibration–assisted Grinding of Hardened GCr15 Steel

Wear behaviour of abrasive tools and its effect on surface integrity during polishing superalloy GH4169G with abrasive cloth flap wheels

Friction and wear characteristics of agglomerated diamond abrasives and lapping performance of fixed agglomerated diamond pads

Effect of grinding on the hydration of hydratable alumina and properties of hydratable alumina-bonded castables

Effect of Solution Aging Heat Treatment on Tribological Properties of Selective Laser Melted WC/18Ni300 Composite

Tool wear behavior of alumina abrasive wheels during grinding FGH96 powder metallurgy nickel-based superalloy

On the Tool Wear Behavior During Ultrasonic Vibration-Assisted Form Grinding with Alumina Wheels

Effect of trace alumina on mechanical, dielectric, and ablation properties of fused silica ceramics

Effect of Heat Treatment on Tribological Properties of SiCp/Al–Mg–Mn–Cu Aluminum Matrix Composites

Effect of interfacial Fe3O4 nanoparticles on the microstructure and mechanical properties of textured alumina densified by ultrafast high-temperature sintering

Study on grinding performance during ultrasonic vibration-assisted grinding ultra-high strength steels

Precipitates Evolution During Isothermal Aging and Its Effect on Tensile Properties for an AFA Alloy Containing W and B Elements

Comparative investigation on wear behavior of brown alumina and microcrystalline alumina abrasive wheels during creep feed grinding of different nickel-based superalloys

Investigation of grindability and surface integrity in creep feed grinding of GH738 alloy using different grinding wheels

Influence of Al2O3 reinforcement on the abrasive wear characteristic of Al2O3/PA1010 composite coatings

Dependence of Wear Behaviors of Hardmetal Yg8b on Coarse Abrasive Types and Their Slurry Concentrations

Wear behavior of alumina abrasive belt and its effect on surface integrity of titanium alloy during conventional and creep-feed grinding

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Study on the development of CeO2 self-sharpening gel abrasive tools and grinding performance on quartz glass