Wear behaviour of abrasive tools and its effect on surface integrity during polishing superalloy GH4169G with abrasive cloth flap wheels
Rui Yang,Xiaojun Lin
DOI: https://doi.org/10.1016/j.jmapro.2024.04.053
IF: 5.684
2024-04-23
Journal of Manufacturing Processes
Abstract:In polishing nickel-based superalloys, the surface quality and dimensional accuracy of the workpiece are closely related to the wear of the abrasive tools. Over the years, several researchers have studied the wear of grinding wheels or abrasive belts, including the effects of various machining methods, abrasive materials, and machining parameters on the wear of abrasive tools. However, there is not enough research on the wear mechanism of the abrasive cloth flap wheel (ACFW). In this paper, during polishing GH4169G with ACFW, the wear evolution mechanism of ACFW and its effect on the surface integrity of GH4169G were investigated. First, the variations in material removal and ACFW wear amounts during the polishing process were analysed, and the different wear stages were divided based on the polishing ratio. Second, the mic-morphology and surface element distribution of ACFW at different wear stages were investigated using SEM and, EDS, and the wear evolution mechanism of ACFW was analysed. Finally, the effects of ACFW wear on the surface morphology, surface oxidation and microstructure of GH4169G were investigated by SEM, EDS, XRD, and EBSD. The results showed that the primary wear forms of ACFW were stepped fracture, cleavage fracture, blunt, pull-out, and adhesion wear. During the initial wear stage, the proportion of each wear form was relatively balanced. In the medium wear stage, fracture wear was the main wear form. Blunt and adhesive wear were the primary forms of wear during the final wear stage. In addition, with ACFW wear, the surface roughness tend to decrease first and then increase, however, the refinement level of the grains, the intensity of plastic deformation and the intensity of the oxidation reaction gradually increased. This study provides effective guidance for developing more wear-resistant abrasive tools and optimising the grinding and polishing processes.
engineering, manufacturing