Abstract:Laser powder bed fusion (LPBF) allows the fabrication of complex parts with high resolution. In the process of manufacturing complex parts, overhanging structures with unique mechanical properties are inevitable. The mechanical properties are relevant to the microstructure that are severely influenced by the support structures and build orientation. In this study, a three-dimensional finite element model was established to numerically investigate the thermal behavior of the melt pool in the overhanging structures, and the effects of different forming conditions on tensile behavior were analyzed through the microstructure of overhanging specimens and fracture surfaces of failed specimens. The simulation results show that the change trend of the melt pool size is the same as that of the maximum temperature. Moreover, the melt pools closer to the down-facing surface of overhanging structures carry higher temperature and larger size. The application of the support structures effectively reduces the temperature of the melt pool in the starting layer by 5.3%. With the increase of inclination angle, the melt pool temperature in the starting layer decreases slightly. The experimental results indicate that the mechanical properties of 45° specimens fabricated above the entity are stronger than those of 45° specimens with support structures, and the mechanical properties of 45° specimens with support structures are stronger than those of 45° specimens without support structures. Moreover, the mechanical properties of the specimens deteriorate when the build orientation of the overhanging structures varies from 0° to 45°. The mechanical properties of different specimens with 45° build orientation are mainly affected by the thickness of defect area, and the mechanical properties of the specimens with different build orientations are mainly affected by fracture path. The results will facilitate the understanding and application of the LPBF manufacturing technique for overhanging structures in complex parts.

Mechanical behavior, damage mode and mechanism of AlSi10Mg porous structure manufactured by selective laser melting

Mechanical behavior and response mechanism of porous metal structures manufactured by laser powder bed fusion under compressive loading

Mechanical response and response mechanism of AlSi10Mg porous structures manufactured by laser powder bed fusion: Experimental, theoretical and numerical studies

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

The AlSi10Mg Samples Produced by Selective Laser Melting: Single Track, Densification, Microstructure and Mechanical Behavior

Influence of Manufacturing Geometric Defects on the Mechanical Properties of AlSi10Mg Alloy Fabricated by Selective Laser Melting

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Tensile behavior of AlSi10Mg overhanging structures fabricated by laser powder bed fusion: Effects of support structures and build orientation

Effect of microstructural evolution on mechanical properties and fracture modes of AlSi10Mg blocks fabricated by selective laser melting after stress relief annealing

The Effect of Silicon Phase Morphology on Microstructure and Properties of AlSi10Mg Alloys Fabricated by Selective Laser Melting

Machine-Learning Assisted Laser Powder Bed Fusion Process Optimization for AlSi10mg: New Microstructure Description Indices and Fracture Mechanisms

Micromechanical Modeling of AlSi10Mg Processed by Laser-Based Additive Manufacturing: From as-Built to Heat-Treated Microstructures

Microstructure and mechanical deformation behavior of selective laser melted Ti6Al4V ELI alloy porous structures

Investigation of mechanical properties of laser powder bed fused AlSi10Mg lattice structures using GTN damage model

Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review

Selective laser melting of Al-3.48Cu-2.03Si-0.48Sc-0.28Zr alloy: Microstructure evolution, properties and metallurgical defects

Study on microstructure and properties of selective laser melting formed AlSi10Mg alloy

In-situ tensile testing of fracture and strain in a selective laser melted AlSi10Mg alloy

Study of Size Effect on Microstructure and Mechanical Properties of AlSi10Mg Samples Made by Selective Laser Melting

Generative design and mechanical properties of the lattice structures for tensile and compressive loading conditions fabricated by selective laser melting

Compressive properties and deformation mechanism of selective laser melting of Ti6Al4V porous femoral implants based on topological optimization