Abstract:Sintered NdFeB magnets are being utilised in numerous applications because of the excellent magnetic properties. However, due to its main components are Fe, B and rare earth metals. There is a potential difference between the neodymium rich phase, boron rich phase and the main phase, which was very easy to form a primary battery and cause electrochemical corrosion on the surface of the material. After the materials are easy to be corroded or the components and structures change, the performance of the materials will become weak or even lost, which will affect the service performance and life of the devices or equipment. According to the requirements of surface protection technology for NdFeB magnets, the preparation of protective coating by magnetron sputtering was an efficient means to enhance the corrosion resistance of magnets. Pure Al coating was deficient in microstructure, hardness and corrosion resistance, and the preparation of composite coating by doping co-sputtering had become a development trend. In the current work, AlTi coatings with various Ti contents were prepared from an Al target and a Ti target using direct and radio frequency hybrid magnetron co-sputtering. The surface morphology, microstructure, and elemental compositions of the AlTi coatings were explored through XRD (X-ray diffraction), SEM (scanning electron microscopy), and EDS (energy dispersive spectroscopy). The anticorrosion performances of the AlTi coatings were evaluated by performing electrochemical tests. According to SEM and EDS, the AlTi composite coating was denser and more homogeneous than that of the Al single layer. Furthermore, the results demonstrated that microcrystalline Ti doping reduced the grain size of Al coatings. Therefore, the corrosion current density of the sintered NdFeB magnets plated with Al(120w)/Ti(10w) was approximately more than a hundred times inferior to that of the pure Al layer, and the hardness of AlTi composite coatings also improved.

Effect of laser-assisted surface modification of NdFeB permanent magnets applicable in high-demand working environment

Commercial-Scale Modification of NdFeB Magnets under Laser-Assisted Conditions

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Enhanced mechanical properties and environmental stability of polymer-bonded magnets using three-step surface wet chemical modifications of Nd-Fe-B magnetic powder

The Impact of Plasma Surface Treatments on the Mechanical Properties and Magnetic Performance of FDM-Printed NdFeB/PA12 Magnets

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties

New Developments in NdFeB-Based Permanent Magnets

Boosting Coercivity of 3D Printed Hard Magnets through Nano-Modification of the Powder Feedstock

Magnetic Performance and Anticorrosion Coating Stability of Thermally Demagnetized Nd-Fe-B Permanent Magnets for Reuse Applications

An effective laser in-situ re-scanning strategy in laser powder bed fusion of Nd-Fe-B permanent magnets: Crack reduction and magnetic properties enhancement

Additive Manufacturing of Bulk Nanocrystalline FeNdB Based Permanent Magnets

Microstructures of Al coatings prepared through magnetron co-sputtering with microcrystalline Ti doping

Defect manipulation for the coercivity enhancement of Nd-Fe-B permanent magnets

Outstanding anti-corrosion performance in Nd–Fe–B permanent magnets by constructing a hydrophobic triplex surface coating

Influence of colloidal additivation with surfactant‐free laser‐generated metal nanoparticles on the microstructure of suction‐cast Nd‐Fe‐B alloy

Fabrication and Properties of Micro-arc Oxidation Coatings on Sintered NdFeB Permanent Magnets

Laser Powder Bed Fusion of anisotropic Nd-Fe-B bonded magnets utilizing an in situ mechanical alignment approach

Recent developments in hard magnetic bulk materials

Tailoring the Impact Toughness of Sintered NdFeB Magnets Via Surface Coating

The Effect of Temperature on Magnetic Properties and Surface Integrity in Nd2Fe14B Permanent Magnets, Under Dry and Wet Grinding for Automotive Applications

Polymer-bonded magnets produced by laser powder bed fusion: Influence of powder morphology, filler fraction and energy input on the magnetic and mechanical properties