Abstract:Bolted spherical joints are widely used to form space steel structures. The stiffness and load capacity of the structures are affected by the looseness of bolted spherical joint connections in the structures. The looseness of the connections, which can be caused by fabrication error, low modeling accuracy, and "false twist" in the installation process, may negatively impact the load capacity of the structure and even lead to severe accidents. Furthermore, it is difficult to detect bolted spherical joint connection looseness from the outside since the bolts connect spheres with rods together from the inside. Active sensing methods are proposed in this paper to monitor the tightness status of the bolted spherical connection using piezoceramic transducers. A triangle-on-triangle offset grid composed of bolted spherical joints and steel tube bars was fabricated as the specimen and was used to validate the active sensing methods. Lead Zirconate Titanate (PZT) patches were used as sensors and actuators to monitor the bolted spherical joint tightness status. One PZT patch mounted on the central bolted sphere at the upper chord was used as an actuator to generate a stress wave. Another PZT patch mounted on the bar was used as a sensor to detect the propagated waves through the bolted spherical connection. The looseness of the connection can impact the energy of the stress wave propagated through the connection. The wavelet packet analysis and time reversal (TR) method were used to quantify the energy of the transmitted signal between the PZT patches by which the tightness status of the connection can be detected. In order to verify the effectiveness, repeatability, and consistency of the proposed methods, the experiments were repeated six times in different bolted spherical connection positions. The experimental results showed that the wavelet packet analysis and TR method are effective in detecting the tightness status of the connections. The proposed active monitoring method using PZT transducers can monitor the tightness levels of bolted spherical joint connections efficiently and shows its potential to guarantee the safety of space steel structures in construction and service.

On-Line Fault Diagnosis for Structural Health of Wind Power Dedicated Busbar Trunking

Bolt Looseness Detection Using SH Guided Wave and Wave Energy Transmission

An Improved Diagnostic Method for Detection of Bolt Loosening in Thermal Protection Panels

A New Diagnostic Method of Bolt Loosening Detection for Thermal Protection Systems

Damage detection of flange bolts in wind turbine towers using dynamic strain responses

Health Monitoring and Altering System On-Line of Bridge Structures Ⅱ——Signal Analysis and Extraction Method for Damage Identification

An Overview on Structural Health Monitoring and Fault Diagnosis of Offshore Wind Turbine Support Structures

Research on online monitoring method for time-varying tension in transmission lines based on operational modal response

Multibolt looseness monitoring of steel structure based on multitask active sensing method and substructure cross-domain transfer learning

Establishment and Application of the Wind and Structural Health Monitoring System for the Runyang Yangtze River Bridge

A Structural Health Monitoring System of the Overhead Transmission Line Conductor

A Cross-Diagnosis Method for Determining the Structural Condition of a Long-Span Suspension Bridge Based on the Spatial Windows of Distributed Strain Data

Real-Time Structural Monitoring of the Multi-Point Hoisting of a Long-Span Converter Station Steel Structure

Health Monitoring of Bolted Spherical Joint Connection Based on Active Sensing Technique Using Piezoceramic Transducers

A New Magnetic Flux Leakage Sensor Based on Open Magnetizing Method and Its On-Line Automated Structural Health Monitoring Methodology

Deformation monitoring and analysis of a long-span cable-stayed bridge during strong typhoons

Study on Multi-parameter On-line Monitoring System for Transformer Bushing

Bolt tightness monitoring using multiple reconstructed narrowband lamb waves combined with piezoelectric ultrasonic transducer

On-line damage assessment of wind turbine blade full-size structural fatigue testing

Health Monitoring of Bolt Looseness in Timber Structures Using PZT-Enabled Time-Reversal Method

Real-time Monitoring System for Multi-Mw Scale Wind Blades Using FBG Sensors