Abstract:Performing online damage evaluation of blades subjected to complex cyclic loads based on the operating state of a gas turbine enables real-time reflection of a blade’s damage condition. This, in turn, facilitates the achievement of predictive maintenance objectives, enhancing the economic and operational stability of gas turbine operations. This study establishes a hybrid model for online damage evaluation of gas turbine blades based on their operational state. The model comprises a gas turbine performance model based on thermodynamic simulation, a component load calculation model based on a surrogate model, an updated cycle counting method based on four-point rainflow, and an improved damage mechanism evaluation model. In the new model, the use of a surrogate model for the estimation of blade loading information based on gas turbine operating parameters replaces the conventional physical modeling methods. This substitution enhances the accuracy of blade loading calculations while ensuring real-time performance. Additionally, the new model introduces an updated cycle counting method based on four-point rainflow and an improved damage mechanism evaluation model. In the temperature counting part, a characteristic stress that represents the stress information during the cyclic process is proposed. This inclusion allows for the consideration of the impact of stress fluctuations on creep damage, thereby enhancing the accuracy of the fatigue damage assessment. In the stress counting part, the model incorporates time information associated with each cycle. This concept is subsequently applied in determining the identified cyclic strain information, thereby improving the accuracy of the fatigue damage evaluation. Finally, this study applies the new model to an online damage evaluation of a turbine stationary blade using actual operating data from a micro gas turbine. The results obtained from the new model are compared with the EOH recommended by the OEM, validating the accuracy and applicability of the new model.

On-line damage assessment of wind turbine blade full-size structural fatigue testing

Fatigue Life Evaluation of Wind Turbine Tower Based on Measured Data

Design optimization of composite wind turbine blades considering tortuous lightning strike and non-proportional multi-axial fatigue damage

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Design Method of Full-scale Fatigue Test Load for Wind Turbine Blade

Damage Mode Identification and Singular Signal Detection of Composite Wind Turbine Blade Using Acoustic Emission

Research on a Method for Online Damage Evaluation of Turbine Blades in a Gas Turbine Based on Operating Conditions

Multiaxial Strain Analysis in Large Wind Turbine Blades under Full-scale Fatigue Testing

A method of determining test load for full-scale wind turbine blade fatigue tests

An Online Fatigue Damage Evaluation Method for Gas Turbine Hot Components

Dynamic Strain Distribution Monitoring and Fatigue Damage Analysis on a 100 kW Wind Turbine Blade Based on Field Aerodynamic Measurements

Load Distribution Optimization Method for Fatigue Test of Full-scale Structure of Biaxial Resonant Wind Turbine Blade

Structural health monitoring of 52-meter wind turbine blade: Detection of damage propagation during fatigue testing

Research on Online Monitoring of Wind Turbine Blade Damage Based on Working Mode Analysis

Monitoring Based Fatigue Damage Prognosis of Wind Turbine Composite Blades under Uncertain Wind Loads

Lifetime Prediction of Wind Turbine Blade Based on Full-Scale Fatigue Testing

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

Wind Turbine Blade Damage Evaluation under Multiple Operating Conditions and Based on 10-Min SCADA Data

Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade-disk