Abstract:Site-specific assessment of wind turbine design requires verification that the individual wind turbine components can survive the site-specific wind climate. The wind turbine design standard, IEC 61400-1 (third edition), describes how this should be done using a simplified, equivalent wind climate established from the on-site distribution functions of the horizontal mean wind speeds, the 90% quantile of turbulence along with average values of vertical wind shear and air density and the maximum flow inclination. This paper investigates the accuracy of fatigue loads estimated using this equivalent wind climate required by the current design standard by comparing damage equivalent fatigue loads estimated based on wind climate parameters for each 10 min time-series with fatigue loads estimated based on the equivalent wind climate parameters. Wind measurements from Boulder, CO, in the United States and Høvsøre in Denmark have been used to estimate the natural variation in the wind conditions between 10 min time periods. The structural wind turbine loads have been simulated using the aero-elastic model FAST. The results show that using a 90% quantile for the turbulence leads to an accurate assessment of the blade root flapwise bending moment and a conservative assessment of the tower bottom for-aft bending moment and low speed shaft torque. Currently, IEC 61400-1 (third edition) neglects the variation in wind shear by using the average value. This may lead to a nonconservative assessment of blade root flapwise fatigue loads, which are sensitive to wind shear. The results in this paper indicate that using a 75% quantile for the wind shear at each wind speed bin leads to an appropriate, but conservative, assessment of the fatigue loads. However, care should be taken when using this approach for components where low or negative wind shears can lead to large fatigue loads. This is the case for some drivetrain components where a lower quantile may be required.

Design Method of Full-scale Fatigue Test Load for Wind Turbine Blade

Fatigue Life Evaluation of Wind Turbine Tower Based on Measured Data

Design optimization of composite wind turbine blades considering tortuous lightning strike and non-proportional multi-axial fatigue damage

A method of determining test load for full-scale wind turbine blade fatigue tests

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Load Distribution Optimization Method for Fatigue Test of Full-scale Structure of Biaxial Resonant Wind Turbine Blade

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

RESEARCH ON FATIGUE TEST OF LARGE HORIZONTAL AXIS WIND TURBINE BLADE

On-line damage assessment of wind turbine blade full-size structural fatigue testing

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

Lifetime Prediction of Wind Turbine Blade Based on Full-Scale Fatigue Testing

Numerical and Experimental Analysis of Horizontal-Axis Wind Turbine Blade Fatigue Life

Multiaxial Strain Analysis in Large Wind Turbine Blades under Full-scale Fatigue Testing

Simulation of fatigue failure in a full composite wind turbine blade

Fatigue load simulation for foundation design of offshore wind turbines due to combined wind and wave loading

Wind Climate Parameters for Wind Turbine Fatigue Load Assessment

Multiaxial Fatigue Life Prediction For Turbine Blades Using Finite Element Analysis

Monitoring Based Fatigue Damage Prognosis of Wind Turbine Composite Blades under Uncertain Wind Loads

Stress Characteristic Study of Heavy-duty Gas Turbine Blade under Centrifugal Load