Abstract:Sequential infiltration synthesis (SIS) is a powerful approach for templated growth of solid materials such as oxides or metals that exploits the difference in interaction of a precursor molecule with a polymer or block copolymer. While there have been studies showing that infiltration of trimethyl-alumina (TMA) in polymers can be used to grow Al2O3 there are still many atomic level details of the SIS process that require more investigation, including the origin of the differences in infiltration of TMA into different polymers. In this paper, we investigated in detail the Infiltration of Al2O3 into poly (methyl methacrylate) (PMMA) and poly (lactic acid) (PLA) experimentally and theoretically. SIS was performed in a standard ALD reactor, operating at 70°C in quasi-static mode, using TMA and water as the metal and oxygen precursors, respectively. Operando spectroscopic ellipsometry and ex-situ x-ray photoelectron spectroscopy (XPS) evidenced that Al2O3 incorporation in PLA is significantly higher than in PMMA even if, in both cases, TMA incorporation occurs through the formation of an Al-O covalent bond at the C-O-C group. The extent of swelling of the polymers upon TMA infiltration is assessed and is clearly larger for TMA in PLA than in PMMA. First principles density functional theory (DFT) calculations highlighted that both polymers display swelling upon TMA infiltration, saturating with increasing TMA, consistent with operando ellipsometry observations. The DFT results also show the origin of the larger swelling in PLA compared to TMA. Changes in vibrational modes of carbonyl backbone groups in the polymers are used to demonstrate TMA-polymer interactions from both experiment and simulation. The differences in TMA infiltration and swelling arises from differences in the TMA-polymer C-O-C group interaction, which is more exothermic in PLA than in PMMA, in agreement with experimental results. The combination of experimental and theoretical studies herein reported provides a toolkit to disclose the complexities of SIS at the molecular level.

Dealkylation of Poly(methyl methacrylate) by TiCl 4 Vapor Phase Infiltration (VPI) and the Resulting Chemical and Thermophysical Properties of the Hybrid Material

Depolymerization and Etching of Poly(lactic acid) via TiCl 4 Vapor Phase Infiltration

Diffusion Behavior and Kinetics for the Vapor Phase Infiltration of Trimethylaluminum in Poly(ethylene oxide): An In Situ Quartz Crystal Microgravimetry Study

Alkylation and Coupling of Living Poly(methyl Methacrylate) Ylides at Ambient Conditions

Trimethylaluminum Diffusion in PMMA Thin Films during Sequential Infiltration Synthesis: In Situ Dynamic Spectroscopic Ellipsometric Investigation

On the differences in trimethylaluminum infiltration into PMMA and PLA polymers for sequential infiltration synthesis: insights from experiment and first principles simulations

Volume compensating materials after vapor phase infiltration: effect of different butyl isomers of polymer side-chains on high process temperature durability

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Phase Behavior and Properties of Poly(methyl Methacrylate)/poly(vinyl Acetate) Blends Prepared Viain Situ Polymerization

Preparation and Investigation of Pvdf/Pmma/Tio2 Composite Film

Segmental Dynamics and Rheology of Miscible Poly(vinylidene Fluoride)/poly(methyl Methacrylate) (70/30 by Weight) Blend Filled with Titania or Poly(methyl Methacrylate)-Grafted Titania

Poly(Methyl Methacrylate)-Titania Hybrid Materials by Sol-Gel Processing

Vapor Phase Infiltration of Titanium Oxide into P3HT to Create Organic-Inorganic Hybrid Photocatalysts

Preparation and investigation of PVDF/PMMA/TiO 2 composite film

Crystallization behavior of PVDF/PMMA blends prepared by in situ polymerization from DMF and ethanol

Thermal imidization of poly(amic acid) precursors on surface-modified poly(tetrafluoroethylene) films via graft copolymerization with glycidyl methacrylate

Thermal and Mechanical Properties of Reprocessed Polylactide/Titanium Dioxide Nanocomposites for Material Extrusion Additive Manufacturing

Vapour Phase Grafting of Vinyltrimethoxysilane and Water Crosslinking of Polypropylene

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Preparation Of Poly(Methyl Methacrylate-Co-Maleic Anhydride)/Sio2-Tio2 Hybrid Materials And Their Thermo- And Photodegradation Behaviors

Investigation of the Impact of Chemical Modifications on the Photostability of Polymethyl Methacrylate